Microtech Learning to Tune
#1
Full Member
Thread Starter
Join Date: Jul 2003
Location: Alaska
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Learning to Tune
Well i posted earlier about finding someone to tune an rx7 in alaska, i have a good feeling thats not going to work. So i was wondering if their were any class's on tuning, or if someone could teach me to tune. If someone that has experiance with LT8S would be interested in something like this send me a PM, i would be looking to do this in about 4 weeks, any other help would be appreciated..
#2
Rotary Freak
iTrader: (10)
well the way i learned was by just hooking up the laptop and ******* with the settings. i dont think anyone can just teach me this stuff because i wont absorb it as well as doing it myself. also read the manual it comes in handy.
BTW you can download the manual here: http://www.geocities.com/rexryder8/Mthelp.hlp and it's only like 160kb so 56k=ok
BTW you can download the manual here: http://www.geocities.com/rexryder8/Mthelp.hlp and it's only like 160kb so 56k=ok
Last edited by RexRyder; 08-01-05 at 08:50 PM.
#3
Full Member
Thread Starter
Join Date: Jul 2003
Location: Alaska
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
well thanks for that, I'm just in a really hard situation here with never tuning a RX7, running the setup that i have i just dont' feel comfortable putting even a base map on it. But i guess thats what i'll do and if need any help, somebody here is always willing to help... Thanks
#4
3rd motors a charm I hope
Join Date: Apr 2003
Location: Central New York
Posts: 2,054
Likes: 0
Received 0 Likes
on
0 Posts
one thing is for sure, you will want to have a wideband. just gradually turn the boost up and keep an eye on your AFRs. IF they go higher then you desire, then you need to let off the gas and adjust them.
#5
Compression Tester Guy
iTrader: (3)
Join Date: Apr 2003
Location: Houston, TX
Posts: 1,010
Likes: 0
Received 0 Likes
on
0 Posts
Hey Rex, I'd like a copy of that help file too but it looks like Geocities is cutting you off. If you email it to me (john@twistedrotors.com) then I'll host it through my site and toss it back up here. :-)
-John
-John
#6
Senior Member
Join Date: Jul 2002
Location: Richland Wa.
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
www.efi101.com <- they are hosting a class in dec. in washington. I am a graduate and it was the best money I ever spent, its in your best interest to find a way to get there...
Hope to see you there as I am going through the 101 class again.
Justin
www.alienauto.com
Hope to see you there as I am going through the 101 class again.
Justin
www.alienauto.com
#7
Rotary Freak
iTrader: (10)
Originally Posted by TwistedRotors
Hey Rex, I'd like a copy of that help file too but it looks like Geocities is cutting you off. If you email it to me (john@twistedrotors.com) then I'll host it through my site and toss it back up here. :-)
-John
-John
BTW I also have a scanned version of the real manual/wire diagrams in adobe reader format, its 14 megs tho.
Last edited by RexRyder; 08-02-05 at 06:37 PM.
Trending Topics
#8
Compression Tester Guy
iTrader: (3)
Join Date: Apr 2003
Location: Houston, TX
Posts: 1,010
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RexRyder
emailed the help file to you.
http://www.twistedrotors.com/mt/Mthelp.hlp
-John
#9
Full Member
Thread Starter
Join Date: Jul 2003
Location: Alaska
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Well thanks for that Info about the class im going in September. :-) And i do have a wideband O2 sensor already...2 bar that is.... So yeah i hope the class teaches me alot as im not familiar with tuning, and i did download the manual but i really didn't understand how that was supposed to help me, maybe i downloaded the wrong one all it did was explain each of the imput options, and the the functions of microtech... Maybe i just need to go to the class
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM