Microtech Area is for discussing Microtech systems

Microtech id 2000 and lt10s

Old 09-03-10, 07:46 PM
  #1  
Full Member
5 Year Member
Thread Starter
 
Join Date: Apr 2005
Location: nz
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
id 2000 and lt10s

just put the new injectors in and took mixtrm out from 0 to -40 up to -90 and flooded the **** out of it

even took some out of the crank map as well and still no luck , it nearly wanted to go but never caught

im going to put this map back into it for a start again as it was running 900 -1680 cc injectors

this is a map from rx72c which was simalar to what was it it ( had taken fuel out here and there

it now has 4 id 2000 injectors yes i have a lc1 and lm2 kit so can watch ar s



Idle Map
Screen 1

30" ~ 1.38
25" ~ 1.48
20" ~ 1.33
15" ~ 1.71
10" ~ 1.71
05" ~ 1.62
00" ~ 2.00
2-20psi ~ 4.95

Load Map
Screen 3

30" ~ 0.95
25" ~ 1.19
20" ~ 1.33
15" ~ 1.71
10" ~ 2.14
05" ~ 2.57
00" ~ 2.86
2psi ~ 2.2
4psi ~ 3.2
6psi ~ 3.8
8psi ~ 4.4
10psi ~ 4.9
14psi ~ 5.5
16psi ~ 5.9
18psi ~ 6.5
20psi ~ 7

RPMwot Map Screen 17

5000 ~ 05
5500 ~ 08
6000 ~ 08
6500 ~ 10
7000 ~ 11
7500 ~ 11
8000 ~ 11
9000 ~ 12

The rest are zero

RPMcrs Screen 18

1000 ~ -12
1500 ~ -11
2000 ~ -12

THe rest are zero



Pump Map
Screen 19

Pump2Start ~ 2000
Pump1Amt ~ 00
Pump1Pulse ~ 04
Pump1Trig ~ 18
Pump1Stop ~ 00
Pump1Adv ~ 05

Pump2Time ~ 10
Pump2Amt ~ 30
Pump2Trig ~ 16
Pump2Stop ~ 00
Pump2Adv ~ 05

PumpDwell ~ 3.00
PumpTimers ~ No
Pump1Sync ~ No
PumpSpare ~ 00
PumpCold ~ 00

Water Map
Screen 20

-25 ~ 0
-17 ~ 70
-9 ~ 60
-01 ~ 50
05 ~ 45
11 ~ 45
18 ~ 42
24 ~ 34
31 ~ 26
38 ~ 24
46 ~ 19
60 ~ 12
68 ~ 06
82 ~ 0
99 ~ 0
124 ~ 0

Air_t Map
Screen 21

-25 ~ 0
-17 ~ 8
-9 ~ 6
-1 ~ 5
5 ~ 4
11 ~ 3
18 ~ 3
24 ~ 0
31 ~ 0
38 ~ 0
46 ~ 0
60 ~ 0
68 ~ 0
82 ~ 0
99 ~ 0
124 ~ 0

Crank Map
Screen 22

-25 ~ 72
-17 ~ 72
-9 ~ 72
-1 ~ 67
5 ~ 62
11 ~ 57
18 ~ 50
24 ~ 41
31 ~ 31
38 ~ 26
46 ~ 20
60 ~ 15
68 ~ 5
82 ~ 0
99 ~ 0
124 ~ 0

t*rpm
Screen 23

Idle ~ 10
1000 ~ 10
1500 ~ 15
2000 ~ 20
2500 ~ 25
3000 ~ 25
3500 ~ 25
4000 ~ 25
4500 ~ 25
5000 ~ 25
5500 ~ 25
6000 ~ 25
6500 ~ 25
7000 ~ 25
7500 ~ ??
8000 ~ 25
9000 ~ 25

t*map Map
Screen 24

Idle ~ 00
25 ~ 05
20 ~ 04
15 ~ 03
10 ~ 02
05 ~ 00
00 ~ 00
2psi ~ 00
4psi ~ 00
6psi ~ 02
8psi ~ -04
10psi ~ -06
14psi ~ -10
16psi ~ -12
18 psi ~ -16
20 psi ~ -20

t*air Screen 25
Correction value Is expressed as number of degrees you wish to advance or Retard to the Ignition curve and values Is set at zero.

t*gap
Screen 26

0500 ~ 15
1000 ~ 15
1500 ~ 15
2000 ~ 14
2500 ~ 12
3000 ~ 10
3500 ~ 10
4000 ~ 10
4500 ~ 10
5000 ~ 10
5500 ~ 10
6000 ~ 10
6500 ~ 10
7000 ~ 10
8000 ~ 10

t*Inj Map
Screen 27

0500 ~ 120
1000 ~ 150
1500 ~ 150
2000 ~ 150
2500 ~ 150
3000 ~ 150
3500 ~ 150
4000 ~ 150
4500 ~ 180
5000 ~ 210
5500 ~ 210
6000 ~ 240
6500 ~ 240
7000 ~ 270
8000 ~ 270
9000 ~ 270

t*wat Map Screen 28


ANd the rest are zero

Option Map
Screen 30

Af_StE ~ 10
Dwell ~ 3.25 *set at Time Base - not at Duty Cycle*
REVstg ~ 1320
MAPstg ~ 02"
%stg ~ 50
mattmarrx3 is offline  
Old 09-04-10, 02:40 AM
  #2  
Full Member
5 Year Member
Thread Starter
 
Join Date: Apr 2005
Location: nz
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
found the t gap was on 0 dont know how and plugs were washed and about -55-65 % out of it will get her going so new plugs are on order will put some 7 or 8 in it to get it going so i can lean it way out ggggggggrrrrrrrrrrr

has nobody put them in a 13b yet? on pump gas
mattmarrx3 is offline  
Old 09-09-10, 02:05 AM
  #3  
Rotary Freak
iTrader: (8)
 
rx72c's Avatar
 
Join Date: Jun 2003
Location: Australia
Posts: 2,608
Likes: 0
Received 0 Likes on 0 Posts
i have plenty of times. just not with a microtech.

It is possible. Just not enough tuning resolution. Wont be a perfect tune.
rx72c is offline  
Old 09-09-10, 11:53 AM
  #4  
Full Member
5 Year Member
Thread Starter
 
Join Date: Apr 2005
Location: nz
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
got the idle sitting on about 12.7 ar which at this stage its happy with and -30 odd mix trm they are way to big but now there is no chance ill run out of fuel scored a os gliken twin plate for it so theres another job thats on the list to fit
mattmarrx3 is offline  
Old 09-09-10, 12:28 PM
  #5  
Rotary Freak
10 Year Member
 
2a+RoN's Avatar
 
Join Date: Dec 2001
Location: chandler, AZ
Posts: 2,402
Likes: 0
Received 0 Likes on 0 Posts
Sorry, I'm not familiar with Microtech's, but you should easily be able to get them leaner on idle.. What pulsewidths are you running at idle?
2a+RoN is offline  
Old 09-09-10, 07:07 PM
  #6  
Rotary Freak
iTrader: (8)
 
rx72c's Avatar
 
Join Date: Jun 2003
Location: Australia
Posts: 2,608
Likes: 0
Received 0 Likes on 0 Posts
leave it where you have it. thats perfect.
rx72c is offline  
Old 09-09-10, 09:50 PM
  #7  
Full Member
5 Year Member
Thread Starter
 
Join Date: Apr 2005
Location: nz
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
it needs a good dyno session to sort it all out but ill road tune it for the mean time , got a mate doing his at the moment as well so it will help
mattmarrx3 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Logan Reinisch
General Rotary Tech Support
44
09-17-18 12:20 PM


Thread Tools
Search this Thread
Quick Reply: Microtech id 2000 and lt10s


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: