Microtech how to change injector settings on the hand controller?
#1
seven-less
Thread Starter
Join Date: Apr 2003
Location: city of houston.... y0!
Posts: 2,082
Likes: 0
Received 0 Likes
on
0 Posts
how to change injector settings on the hand controller?
so i'm reading the handbook and playin with the handset a little to get the idea of everything. but what i can't find is how to change the injector settings cause i went with bigger injectors(had to)
when i ordered my microtech, it had the base map suited for my setup, but now the setup has changed. what i HAD when i ordered it was this:
stock S5 TII motor
hybrid S4 turbo
FMIC
680cc prim.
800cc sec.
full 3" exh.
everything is the same except now i have 1680cc sec. and a to4e .60/1.15ar.
can anyone tell me the things i need to adjust and how to change the injector size?
i gotta make a trip from houston to dallas in order for steve kan to get his hands on this thing before i screw it up...
i really appreciate any help.
when i ordered my microtech, it had the base map suited for my setup, but now the setup has changed. what i HAD when i ordered it was this:
stock S5 TII motor
hybrid S4 turbo
FMIC
680cc prim.
800cc sec.
full 3" exh.
everything is the same except now i have 1680cc sec. and a to4e .60/1.15ar.
can anyone tell me the things i need to adjust and how to change the injector size?
i gotta make a trip from houston to dallas in order for steve kan to get his hands on this thing before i screw it up...
i really appreciate any help.
Last edited by Sir Rupert Hobo; 04-12-05 at 06:24 PM.
#2
Boosting Again
Use a wideband and tune it according to your injectors, there is no where you can just say " i have this thsi adn this" and get it to run right. You should go into normal mode adn adjust teh figures 20"-0"hg since you should boost it untill its really tuned.