Microtech Display Dash Questions
11-09-17, 08:45 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2017
Location: On the internet, confused
Posts: 21
Likes: 0
Received 1 Like
on
1 Post
Display Dash Questions
These are newbie questions, but bear with me.
Can anyone point me toward any sort of documentation for connecting and programming the Display Dash?
I can't seem to connect directly to the dash using the Dash Manager software either... I have the updated Laptop software, and Handset editor software (because my dash is version 3.3), so I'm probably missing something obvious here. I should be able to use a USB cable from the Dash to my laptop right? Or am I just entirely wrong and you program the dash through the ECU?
Can anyone point me toward any sort of documentation for connecting and programming the Display Dash?
I can't seem to connect directly to the dash using the Dash Manager software either... I have the updated Laptop software, and Handset editor software (because my dash is version 3.3), so I'm probably missing something obvious here. I should be able to use a USB cable from the Dash to my laptop right? Or am I just entirely wrong and you program the dash through the ECU?
11-09-17, 02:39 PM
#2
Junior Member
Thread Starter
Join Date: Aug 2017
Location: On the internet, confused
Posts: 21
Likes: 0
Received 1 Like
on
1 Post
Answered my own question...
You can program some basic things by connecting directly to the ECU (screen 32 has some adjustments labeled DASH). But it turns out the Dash can be programmed on the touchscreen itself... *facepalm* Which is described at the end of the MT Programming manual...
You can program some basic things by connecting directly to the ECU (screen 32 has some adjustments labeled DASH). But it turns out the Dash can be programmed on the touchscreen itself... *facepalm* Which is described at the end of the MT Programming manual...