Hey all,

I was just wondering if there was a way to set the RPM range on the dash unit's graphical display. Right now it only starts showing RPMs at 3k on the graphical display (initial screen with water temp, graphical RPM guage and actual numeric RPM).

Is there a way that I can set this or is 3k RPM standard?

Thanks in advance for any enlightenment.

Jaime

 

At the screen 31 there are 4 setup points for the dash unit.

- SHIFT:
This value sets the rev range the tachometer will cover and the switch on point for the shift light, e.g. - if the redline of your engine is 7000rpm, enter 7000 as the value in this screen. Now the bar graph tachometer will be completely filled at 7000rpm and the high intensity shift lamp will come on just before redline is reached.
(If your value is 5000, the graph tachometer begins earlier.)

- WATER:
Set the maximum safe water temperature.

- BOOST:
Set the maximum save boost level.

- AIR_T:
Sets the threshold at which the Air_T warning will come on.