Microtech adjusting tps on microtech
#1
adjusting tps on microtech
Ok this is a dumb microtech newb question that will really show my ignorance when it comes to tuning but how do you adjust the tps on the microtech? Right now the MT is reading 30% without my foot being on the pedal. I know there is a way to set the microtech to 0% just can't find it. THanks.
#2
Rotary Freak
iTrader: (8)
Easy.
put the car in ignition.
Go up till you see opt_mixtrm.
Then press the right button once and youll see opt_tpscal
Press the RED mode button once.
And press up or down (and watch the number in the 2nd line of the handset, go in which ever direction that makes that number go closer to 0, and keep going till you see the zero with a * or a square block next to it, and thats it, your tps is calibrated.)
put the car in ignition.
Go up till you see opt_mixtrm.
Then press the right button once and youll see opt_tpscal
Press the RED mode button once.
And press up or down (and watch the number in the 2nd line of the handset, go in which ever direction that makes that number go closer to 0, and keep going till you see the zero with a * or a square block next to it, and thats it, your tps is calibrated.)
Thread
Thread Starter
Forum
Replies
Last Post
Donald Hampton
2nd Generation Specific (1986-1992)
5
09-17-15 03:13 PM