MS V3, fresh rebuilt with stock everything (for now) who thinks Ill get it started with an untuned MS?

I doubt I will, but Ill try for a weekend. Dont wanna drop money on a factory harness and ECU just to get the damn thing started.

 

I don't see why you wouldn't be able to get it started and running. Maybe not running well but running at least.

 

If you're using the generated VE table, it's going to be far too lean... richen the whole VE table up by 10-15% from what was generated (maybe even more than that), and I'm sure you'll be able to get it fired up.

Ken

 

yea, i got a fresh rebuild started yesterday off of an untuned MS1. Found out that i need to rebuild the turbo, but she started and idled well.

 

Sweet. Thanks for the tip Ken and the words of encouragment everyone. Im gonna set up more of the parameters on the MS tonite and hopefully get it wired in this weekend.

 

Yeah, and I just got mine started last weekend on a fresh build.

 

You can do it ... all niiite long! J/K ...

I'm sure after a few cranks and watching p/w's you will get it ...