Megasquirt Tuning Points: Idle Smoothness and consistancy

Reply Subscribe

Thread Tools

Search this Thread

Mar 3, 2008 | 10:30 AM

#26

muythaibxr

MegaSquirt Mod

Joined: Sep 2004

Posts: 4,721

Likes: 1

From: Maryland

Quote:

Originally Posted by Jobro

the wheel i'm getting has 60 teeth over ~11-12 inches, so they are close, and the hall sensor is quite big. Is this gonna be a problem?

It could, the sensor needs to be the correct size for the teeth. It won't hurt to try it though. I'd try setting it up on a bench with a drill or something first, that way you don't have to mount it to the engine to see if it works.

Ken

Mar 3, 2008 | 04:10 PM

#27

Jobro

Thread Starter

SAE Junkie

iTrader: (2)

Joined: Mar 2005

Posts: 1,287

Likes: 12

From: OZ/AU

Quote:

Originally Posted by muythaibxr

GT Target Min Tooth Height 5.06mm
GT Target Min Tooth Width 2.54mm
GT Target Min. Tooth Spacing 10.16mm
GT Target Thickness 6.35mm
GT Target Thickness 101.6mm
GT Airgap 1.02mm to 2.03mm

Seems it will be unsuitable. The tooth will nearly 2.54mm wide, but definitely not 10mm spaced or 5mm high.

I guess I better start looking for another.

D19 was the failed component. It was a dead short.