Megasquirt sorry main board question
#1
Full Member
Thread Starter
Join Date: Aug 2009
Location: va beach
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
sorry main board question
sorry i feel like im being very bothersome since im constantly asking questions sorry but i was wondering on the MS2 V 3.57 main board i have looked at the schematic for it and looked at he main board itself and in order for me to connect my zeal board to main board one of the connections require the zeal to be connected from zeal 12v to main board S12 and there isnt an S12 unless its JS12 and also cant find SG also can anybody tell me where they are please and thanks.
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Here are the instructions for the Zeal for reference:
http://www.diyautotune.com/tech_arti...d_assembly.htm
Here's the power section schematic of the 3.57:
http://www.megamanual.com/357/V357_schenmatics6.gif
S12 is just a clean 12V connection. It connects to the cathode of D11 so it's going to be on the side of the board with the DB37, right near the group of SPR pads.
SG is just a "Signal Ground". To the left of the CPU, just below the boot jumper you will find pads for SG and 5V.
Here's the board diagram:
http://www.megamanual.com/357/V357_silk.gif
http://www.diyautotune.com/tech_arti...d_assembly.htm
Here's the power section schematic of the 3.57:
http://www.megamanual.com/357/V357_schenmatics6.gif
S12 is just a clean 12V connection. It connects to the cathode of D11 so it's going to be on the side of the board with the DB37, right near the group of SPR pads.
SG is just a "Signal Ground". To the left of the CPU, just below the boot jumper you will find pads for SG and 5V.
Here's the board diagram:
http://www.megamanual.com/357/V357_silk.gif
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM