Megasquirt RX8 wheel getting error #52 at cranking - what does it mean?
#1
Senior Member
Thread Starter
RX8 wheel getting error #52 at cranking - what does it mean?
I have an S4 running (err... not running) with the RX8 wheel and VR sensor/location running through the MAX9926 conditioner.
I crank around 300 rpm and loose sync once per rev and get an error #52 every time.
"52 = 36-2-2-2 tooth 30 error"
Sooo tooth 30 error? Any ideas there? I'm going to scope the MAX9926 output and double check that it's functioning properly but any help would be much appreciated.
I crank around 300 rpm and loose sync once per rev and get an error #52 every time.
"52 = 36-2-2-2 tooth 30 error"
Sooo tooth 30 error? Any ideas there? I'm going to scope the MAX9926 output and double check that it's functioning properly but any help would be much appreciated.
Last edited by RXBeetle; 04-22-17 at 07:06 PM.