Megasquirt Running Rich after shifting????
Thread Starter
Gen 2 Raced Hard NA 13B
Joined: Apr 2006
Posts: 272
Likes: 0
From: Canada
Running Rich after shifting????
Hi Guys,
Thanks for the help so far my race car is getting better. At this point I have a over rich point after each shift. My AFR goes to 10.9 to 11.5 right after I make a shift with TP at 100% at 4000 RPM to 4200 RPM. The VE table seams to be correct and even on both sides of the RPM range. Do I work on a notherer area? Accel wizard??
Thanks Kim
Thanks for the help so far my race car is getting better. At this point I have a over rich point after each shift. My AFR goes to 10.9 to 11.5 right after I make a shift with TP at 100% at 4000 RPM to 4200 RPM. The VE table seams to be correct and even on both sides of the RPM range. Do I work on a notherer area? Accel wizard??
Thanks Kim
Rotary Enthusiast
Joined: Oct 2001
Posts: 1,022
Likes: 4
From: Ontario, Canada
Kim,
Do you have a datalog & msq you could post? That would be a big help. If I had to guess, I'd say map is spiking down during the shift, dropping you to an untuned/rich area of the map.
Do you have a datalog & msq you could post? That would be a big help. If I had to guess, I'd say map is spiking down during the shift, dropping you to an untuned/rich area of the map.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
Haltech Forum
11
Mar 11, 2019 05:34 PM
Jeff20B
1st Generation Specific (1979-1985)
4
Jun 26, 2016 10:21 AM
jetlude
Single Turbo RX-7's
4
Aug 18, 2015 04:53 PM
