Megasquirt Quick/Stupid Ground Question
#1
Full Member
Thread Starter
Join Date: Dec 2003
Location: Ames, IA
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Quick/Stupid Ground Question
Does it matter where I ground pins 8, 9, 10, 11, and 19 to? Right now I have:
pin 9 grounded to harness wire 2R
pin 10 grounded to harness wire 3A
pin 11 grounded to harness wire 3G
pin 19 grounded to harness wire 2C
I still need to ground pin 8 and I wasn't sure if its ok for it to share the same ground with another pin. Thanks.
-Andrew
pin 9 grounded to harness wire 2R
pin 10 grounded to harness wire 3A
pin 11 grounded to harness wire 3G
pin 19 grounded to harness wire 2C
I still need to ground pin 8 and I wasn't sure if its ok for it to share the same ground with another pin. Thanks.
-Andrew
#2
MegaSquirt Mod
Pin 19 should be grounded to one of the "2" grounds... whichever one is the sensor ground.. which can be checked by using an ohm meter to check for continuity from that pin to one of the MAT sensor plug's pins.
I can't remember off the top of my head which one it is.
I can't remember off the top of my head which one it is.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM