I am currently running a camden setup at 9psi on my 84 stock port 12a. I am going to be using a ms to control spark here real soon. Does anyone have a good base map for a 12a out there at all?

 

Search my previous posts, I promise you will find something under my name!

 

Found an old map of yours i think but was it under boost or not? this is gonna be just spark only with a map sensor to retard timing when needed!

 

GOnna need help with this one lol. It is going to be used for spark only for the time being so what settings should i need to play with i am a newb with the ms and am reading up on stuff. Just curious what all am i going to need to run this. This is again with a 7inch camden. Right now dizzy is locked at 10 btdc 0 trailing. Just wanna be able to have a little more control with the setup!

 

the stock dizzy timing is in the FSM, you have to double all the values, the dizzy spins and half crank speed.

 

I dont think i should exceed the 15 mark with 10lbs so i gues that would make it 30 on the table then huh. I am just looking for a safe base map based on 12a stock internals and a 10psi of boost!

 

at 10psi you could easily run 18 - 20 degrees of timing, but to be safe stay around 15 for now.

 

Thanks zach you wanna come up with some linear numbers for me?

 

Anyone have a stock t2 map i can have?

 

Why don't you just take my map and feather the timing back to 12 degrees at 12 psi.