Alright, it's been a while since I've posted OR modified my car, but it's heating up outside and it's time to do something new.

For my birthday, txFCturboII got me a ms2 and Zeal board. The MS came assembled, and I've just finished soldering up the Zeal board.

I've seen the writeup's from Aaron and others about the MS.

I'm a little confused as to how many kinds of MS's there are. I have a receipt from DIYauto that says I have a PCB2.2 . Any early tips from MS veterans?

 

The FAQ contains the info on where you need to connect the triggers on the 2.2 board. All the rest of the stuff is basically the same. You need to add the resistors to the LEDs. If you are running low impedance injectors, I suggest using injector resistors as the 2.2 board doesn't have the built in flyback circuit.

 

if its a v2.2 get the jbperf peak and hold board for the injectors.

 

the jbperf board works really well and his assistance with it was very helpful.