I need a BASEMAP MSQ...to get my baby running.

If someone has something similar to my build it would be more than grateful.

Any suggestions would also be helpful as well.

I own a 1988 Mazda rx7 gxl and this is what has been done to the car

J-spec S5 TII 13B (bough used from Japan and no internal upgrades at all)
MegaSquirt II V3.0 (or so I think, was sold to me by someone a while back in 2008)
Stock CAS, leading and trailing coils
1000cc primary and 1200cc secondary
Aeromotive A1000 fuel pump
E85 with premix (need help getting afr's correct for E85 usage...)
All emissions have been taken off
NGK AFX wideband
No name brand boost controller

thanks,

Matt

 

Also....

T61 (70mm) turbo
44mm Wastegate

 

Using the VE calculator should get you a close enough VE table to start the car.

Base maps are evil. The quality of most suck and won't help much past starting the car, which you can do without a base map anyway.

That said, there are VE and timing tables available on my site that will get the car started:
How To Megasquirt Your 2nd Gen RX-7: Programming The ECU (MS2)

 

What would I have to change to run premixed E85?

 

Add about 30% more injector time. Actually the base maps on my site should be well rich enough to start a car running E85 on large injectors.