i got my ms to work on my 87 TII all i need now is the stock fuel and spark tablesso i can tune from there i wonder if any body knows where i can find them? any way i used the stock harness except the AIT instead i used the gm sensor, i got a n/a ecu and gut all the insides and used it so i wouldt cut my harness , i dont know why there is a lot of people having problems with the CAS
and the noise deal any who i got clear signal and smooth revs and acceleration
i guess my next experiment is to use the boost controller options and other outputs.



Special Thanks to muythaibxr and renns

 

damn you. DAMN YOU!!!. lol. i might try this, as the other cas i have is mollestered. i would just need the stock vr sensor with the connector. meh. ill just swap wheels and have at er.

 

congrats. After starting to redo the wire harness on my FD I noticed that I'd have problems getting the harness out of the car the next time I have to take the engine out so I'm looking at other ways. I'm thinking I just make and adaptor cable using my old US-Spec computer connector. Gotta desolder that thing off the ecu pcb.

 

i used a dremel tool and a cuting wheel and i cut the pcb out leaving only the connector and some pcb to bolt the connectors back in their place and i put the ms inside the stock ecu so it looks stock