Megasquirt Built a copy of the V3.0 build up... need ignition help
#1
Senior Member
Thread Starter
Join Date: May 2005
Location: MA
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Built a copy of the V3.0 build up... need ignition help
I have removed my stock wiring harness. I have everything wired up but the ignition. Igs-t Igt-t and Igt-s... can someone circle or draw on a digital pic of the engine bay and show me what I am wiring up since my harness is gone?.
Thanks for whoever can help.
-Matt
Thanks for whoever can help.
-Matt
#2
Senior Member
Join Date: Mar 2002
Location: Logan Utah
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
If you find a version of the factory service manual, then it will tell you the wire colors of those wires on the coils themselves. All of the wires on the leading coil are used, and all but one of the wires on the trailing coil are used. I believe if I am not mistaken, the blue/red wire is the one not used, but I could be wrong. Only way to do it right is to get yourself a set of good wiring diagrams and figure out the correct wire colors. Yes, they are the same colors on the coil itself. Also, I believe the faq has actually got the wire colors you are supposed to splice into.
dpf22
dpf22
Thread
Thread Starter
Forum
Replies
Last Post