M.I.A. nearly a couple years and have my old MS2/v.3 build near completion. Need direction - searched, but too much progress has occurred - VERY time-consuming!!! Gone too long to determine latest developments/what works.

Ready for install on:

*13B T2('88 streetport),
*3" exh,
*550's prim./750's sec. to start... what's working out there for this set-up?

Pointing me in the right direction would be greatly appreciated!

-turb'd

 

You should probably start by looking at the FAQ.

Do you have the MS2 with a blue PCB or Green? (the daughtercard itself, not the MS board).

Ken

 

The kit I bought was the MS2 v.3(the board is a bluish color), at the time it was the latest version.

As with most things of this nature, I know some have discovered better ways to achieve functionality through layout changes(additions, deletions, reconfigs, etc.), and before I get too deep into the build-up a general area to start would be of some help .

As a point of reference, I am approx. 1/3 though the process, if that helps any.

Thanks for your attention, Mr. muythai.

-turb'd