Megasquirt Anyone have the Picture of wiring?
Senior Member
Joined: Apr 2007
Posts: 268
Likes: 0
From: San Diego, Ca
https://www.rx7club.com/megasquirt-forum-153/2nd-vr-circuit-build-v3-ms-board-690000/
Post #7 is a PDF made by Paul, H4Inf, you can download with all the information you need.
Post #7 is a PDF made by Paul, H4Inf, you can download with all the information you need.
Thread Starter
Joined: Jan 2002
Posts: 11,093
Likes: 2
From: Hood River oregon
Long story short:
Friend of mine bought an ECU from KingEFI (mistake!). The ECU has been sent over to Ken, and he fixed it and tested it good. When I place it back in the car, the thing gives no RPM indication. Now I need to start tracing wires from the ECU back out to the engine bay, but the diagram you gave me doesnt match what I am seeing on the DB connector.
I am also using the Haltech diagram for the trailing plugs, where the pink wire is Trig, and white is Select.
Friend of mine bought an ECU from KingEFI (mistake!). The ECU has been sent over to Ken, and he fixed it and tested it good. When I place it back in the car, the thing gives no RPM indication. Now I need to start tracing wires from the ECU back out to the engine bay, but the diagram you gave me doesnt match what I am seeing on the DB connector.
I am also using the Haltech diagram for the trailing plugs, where the pink wire is Trig, and white is Select.