Hey all !

I figured it was best to post in the MS section as I'm installing an Ms3Pro in my 2nd Gen.

So while cleaning my stock wiring from all the unused wires I thought I could freshen up a couple of the remaining stock connections with new wires and crimps. So I was wondering if someone had Digikey's part numbers for them or any information at all ?

Thanks !

 

lms-efi has some mazda connectors you can buy:
https://lms-efi-llc.myshopify.com/co...ctors/mazda-oe

not sure what type of pins they use though

 

The S4 uses "EV1" connectors and the S5 uses "Denso" Connectors.

 

Dang, I wish I had known where to get those CAS connectors when I was wiring my car, it would have made my life much easier. I ended up going to a 4 pin Weatherpack but it is kind of big and bulky and I had to order another one when I setup my spare CAS, in hindsight if I wasn't going to use the stock connectors I should have used a 4 pin Deutsch.

 

4 pin Deutsch are nice, but you'll notice they are pricey. and so is the tool...
thankfully the LMS provided clips from C. Ludwig work with standard matco crimps...
i came real close to getting a weatherpack assortment, glad i didn't.

 

Thanks for the link, I did found the crimps I'm after. Now I just need to be able to order them separately..they come with the S4 TPS connector.

https://lms-efi-llc.myshopify.com/co...-tps-connector

I don't know, maybe for a lot of EFI related connectors but the one I'm looking for are the ones for the wiper motor and the cruise control unit and they are not the same. The one I talk about are like the one in the link above.

Yeah, they are indeed very nice and pricey connectors. I'm still thinking about getting a weatherpack kit or paying a visit to the scrap yard to get some and only buy the crimps.

So I will edit the first post and add a picture of the crimps I'm after.

 

Thanks for the link. I will update my Megasquirt writeup with the info.