FD Centre Armrest Top Portion Hold Down Clips B092-55-257
For SaleInterior/Upholstery
Jan 19, 2022, 08:30 PM | Replies: 5 | Views: 1203
-
Price
$20
- Location Richmond, BC, V7C2R2, Canada
- Condition New
- Compatibility
| Make | Model | Year |
|---|---|---|
| Mazda | RX-7 | 1991 - 2003 |
Description:
These are the clips that attach on the rectangular posts under the cover plastic for the centre console of FD (aka "shifter sorround").
US$20 for five pieces, mail in the Lower US and Canada included.
Limit two sets of 5 per order. I have a total of ten sets of 5 available.
PM me for payment instructions.
Thread Starter
Joined: Mar 2015
Posts: 6,934
Likes: 1,660
From: B.C.
Note that the manual explains when lifting the centre cover, to lift from the back end. Lift about 1/2 inch and move forward gently to release the side clips.When you have the sides up about 1/2 inch, lift the front straight up to release the front positioning pins (which are usually long gone). After that, tip to one side to release the switch connector plugs. You might leave the plugs plugged in as you can likely mount the clips without disconnecting. (likely good to unscrew the shift ****. Good luck.
While you have the centre part up,maybe replace the anti squeak tape (everywhere).
While you have the centre part up,maybe replace the anti squeak tape (everywhere).
