Picture of the turbo heat shield I’m looking for…..

~GW

 

Picture of the alum brace I need.

 

I have a datalogit I would potentially part with.

 

Hey Bro!
FYI, I think I may have a cpl of the OEM bolts. I replaced my bolts because I had added a 5-point seat belt.
How many do you need? I've sold something to you I think? Let me know bro, I'll give you them to you for nothing. Send me your number, and I can send you a pic of them to be sure they match what you want.
Do you mind paying the shipping?
Thx,
Lou

 

Lou, You sure did. Ill shoot you a pm.


~ GW

 

Updated list of the stuff I’m still looking for >

~ R1 / R2 or jdm oem front strut bar

~ two - center console switch blanks.

~ aluminum middle under brace ( The one that has the weird split in the middle ~ pictured circled in red)

~ lower seatbelt bolt ( belt to floor pan )

~ padded arm rest

~ rear trunk shock tower plastics plug covers both left and right ( these are roughly 3”x3” that are on the vertical area just below the rear strut bar )

~ small heat shield for stock twins that mounts to the two bolts holding the turbo actuator on ( looks like a weird “U” piece about 2”x2” with a dog leg - pictured )

~ non Bose rear carpet

~ non Bose privacy cover

~ greddy or feed side elbow

~ new uncut key/‘s blank

~ 99 spec front end parts, 99 rear wing / parts

~ new or very low mileage stock coils ( need all three ~ have mount and harness )

~ viton check valves




~ GW

 

Might have the little heat shield, I'll check when im next at the shop. Also, I could be persuaded to sell my low mileage coils, shoot me a message!

 

Shot ya a pm.


~ GW

 

Updated list of the stuff I’m still looking for >




~ one - center console switch blank



~ aluminum middle under brace ( The one that has the weird split in the middle ~ pictured above circled in red )



~ padded arm rest



~ small heat shield for stock twins that mounts to the two bolts holding the turbo actuator on ( looks like a weird “U” piece about 2”x2” with a dog leg - pictured above)



~ non Bose rear carpet



~ non Bose privacy cover



~ feed side elbow or greedy ( unmodified )



~ new uncut key/‘s blank



~ 99 spec oem front end parts ( bumper cover ,support, fogs, air guide, ext ) would like BB paint if possible.



~99 oem rear wing / parts, would like BB paint if possible



~ M2 twin turbo hard pipes from air box to turbo ( or cx racing ones that have the pre made turbo elbow )


~ crooked willow racing ( cwr ) stock mount Intercooler piping / mounts / duct



Couple pics and a price shipped to 21108. Thanks!
~ GW

 

Updated list of the stuff I’m still looking for >




~ one - center console switch blank



~ aluminum middle under brace ( The one that has the weird split in the middle ~ pictured above circled in red )



~ padded arm rest



~ small heat shield for stock twins that mounts to the two bolts holding the turbo actuator on ( looks like a weird “U” piece about 2”x2” with a dog leg - pictured above)



~ non Bose rear carpet



~ non Bose privacy cover



~ feed side elbow or greedy ( unmodified )



~ new uncut key/‘s blank



~ 99 spec oem front end parts ( bumper cover ,support, fogs, air guide, ext ) would like BB paint if possible.



~99 oem rear wing / parts, would like BB paint if possible



~ M2 twin turbo hard pipes from air box to turbo ( or cx racing ones that have the pre made turbo elbow )


~ crooked willow racing ( cwr ) stock mount Intercooler - piping / mounts / duct


~ pineapple racing big turbo “bt” idler pulley


~ 1993 - 1995 Fd service workshop manual ( three ring binder )



Couple pics and a price shipped to 21108. Thanks!

~ GW

 

Updated list of the stuff I’m still looking for >




~ one - center console switch blank



~ aluminum middle under brace ( The one that has the weird split in the middle ~ pictured above circled in red )



~ padded arm rest



~ small heat shield for stock twins that mounts to the two bolts holding the turbo actuator on ( looks like a weird “U” piece about 2”x2” with a dog leg - pictured above)



~ non Bose rear carpet



~ non Bose privacy cover



~ feed side elbow or greedy ( unmodified )



~ new uncut key/‘s blank



~ 99 spec oem front end parts ( bumper cover ,support, fogs, air guide, ext ) would like BB paint if possible.



~99 oem rear wing / parts, would like BB paint if possible



~ M2 twin turbo hard pipes from air box to turbo ( or cx racing ones that have the pre made turbo elbow )


~ crooked willow racing ( cwr ) stock mount Intercooler - piping / mounts / duct


~ pineapple racing big turbo “bt” idler pulley


~ 1993 - 1995 Fd service workshop manual ( three ring binder )



Couple pics and a price shipped to 21108. Thanks!

~ GW

 

Updated list of the stuff I’m still looking for >>>





~ padded arm rest





~ small heat shield for stock twins that mounts to the two bolts holding the turbo actuator on ( looks like a weird “U” piece about 2”x2” with a dog leg - pictured above)





~ non Bose rear carpet





~ feed / greddy side elbow





~ new uncut key/‘s blank





~ 99 spec oem front end parts : bumper cover ,bumper support, turn signals, fogs, side marker lights (would like BB paint if possible).





~99 oem rear wing / parts (would like BB paint if possible)





~ M2 twin turbo hard pipes from air box to turbo inlet





~ crooked willow racing ( cwr ) stock mount Intercooler parts - piping / mounts / duct





~ aftermarket idler pulley, prefer pineapple racing “bt” but open to others ( air pump deleted )





~ 1993 - 1995 Fd service workshop manual ( three ring binder style)





Couple pics and a price shipped to 21108. Thanks!



~ GW

 

https://buyee.jp/item/yahoo/auction/...uggest_history

For reference.

 

There’s a few companies that make a nice aftermarket version for a fair price. If I can’t find a mint one, I’ll just go with one of them.

~ GW

 

Updated list of the stuff I’m still looking for >>>





~ padded arm rest

~ small heat shield for stock twins that mounts to the two bolts holding the turbo actuator on ( looks like a weird “U” piece about 2”x2” with a dog leg - pictured above)

~ Mint non Bose rear carpet

~ new uncut key blanks

~ 99 spec oem front end parts : bumper cover ,bumper support, turn signals, fogs, side marker lights (would like BB paint if possible).

~99 oem rear wing / parts (would like BB paint if possible)

~ M2 twin turbo hard pipes from air box to turbo inlet

~ crooked willow racing ( cwr ) stock mount Intercooler parts - piping / mounts / duct

~ FFE idler pulley

~ 1993 - 1995 Fd service workshop manual ( three ring binder style)





Couple pics and a price shipped to 21108. Thanks!

~ GW

 

^^^ still looking for these items.


~ GW

 

@CrispyRX7 do you have the CWR parts?

 

^^ That would be funny if I could just drive over ( both in MD ) and pick up the twins hot side piping he’s not using any longer



~ GW

 

Still looking for parts in post #16. Thanks thanks.



~ GW

 

US$25 shipped from Canada. Pm me if this is what you are looking for. @gdub29e

 

US$25 shipped from Canada. Pm me if this is what you are looking for.

 

Updated list of the stuff I’m still looking for >>>




~ Padded arm rest

~ Mint non Bose privacy cover

~ Mint non Bose rear carpet

~ New uncut key blanks

~ 99 spec oem front end parts : bumper cover ,bumper support, turn signals, fogs, side marker lights (would like BB paint if possible).

~99 oem rear wing / parts (would like BB paint if possible)

~ M2 twin turbo hard pipes from air box to turbo inlet

~ Crooked willow racing ( cwr ) stock mount Intercooler parts - piping / mounts / duct

~ FFE idler pulley

~ 1993 - 1995 Fd service workshop manual ( three ring binder style)

~ Bnr stage 1 turbo chra’s ( still back ordered with bnr )

~ Sakebomb Lhd passenger foot rest

~ Garage alpha hyper fuel baffle / surge tank cover




Couple pics and a price shipped to 21108. Thanks!

~ GW

 

Updated list of the stuff I’m still looking for >>>




~ Padded arm rest

~ Mint non Bose privacy cover

~ Mint non Bose rear carpet

~ New uncut key blanks

~ 99 spec oem front end parts : bumper cover ,bumper support, turn signals, fogs, side marker lights (would like BB paint if possible).

~99 oem rear wing / parts (would like BB paint if possible)

~ M2 twin turbo hard pipes from air box to turbo inlet

~ Crooked willow racing ( cwr ) stock mount Intercooler parts - piping / mounts / duct

~ FFE idler pulley

~ Bnr stage 1 turbo chra’s ( still back ordered with bnr )

~ Sakebomb Lhd passenger foot rest

~ Garage alpha hyper fuel baffle / surge tank cover




Couple pics and a price shipped to 21108. Thanks!

~ GW

 

Updated list of the stuff I’m still looking for >>>




~ Padded arm rest

~ Mint non Bose privacy cover

~ Mint non Bose rear carpet

~ New uncut key blanks

~ 99 spec oem front end parts : bumper cover ,bumper support, turn signals, fogs, side marker lights (would like BB paint if possible).

~99 oem rear wing / parts (would like BB paint if possible)

~ Crooked willow racing ( cwr ) stock mount Intercooler parts - piping / mounts / duct

~ FFE idler pulley

~ Sakebomb Lhd passenger foot rest (Spirit R style)

~ Garage alpha hyper fuel baffle / surge tank cover

~ 94-95 rear subframe ( the one with the added reinforcements )


Couple pics and a price shipped to 21108. Willing to drive for local stuff. Thanks!

~ GW