Description:

GAUGE BEZEL - Mazda RX7 FB First Generation  - For Two 2 1/8 Inch Gauges.  

EBAY LINK HERE

https://www.ebay.com/itm/114831890262

Or you can call me and skip eBay.  Patrick 206 307 7222

GAUGE BEZEL - TWO HOLE FOR TWO GAUGES - FITS IN CENTER CONSOLE
LOOKS REALLY GOOD AND GREAT SPOT FOR YOUR GAUGES
I HAVE 4 SETS BUT CAN HAVE MORE MADE

6 1/4 inch X 2 1/4 inch

Mazda RX7 FB First Generation
For Two 2 1/8 Inch Gauges
Condition is "New". Shipped with USPS Priority Mail Small Flat Rate Box.


A friend of mine made me a set of these at his shop -  he made a few extra to see if other FB owners would benefit from it. 

It's a great looking location for gauges.  Note that when you are sitting in the driver's seat, you cannot see the very top of the gauge.  I got used to it right away because I can clearly see the needle position.
 
You are buying the plastic bezel and backing plate only, not the gauges.  It fits in the center console where the tape deck used to live (or other accessory depending on your model).  Included is the bezel face and backing plate used for mounting.  There is a matte side and a shiny side.  I used the gauge's supplied mounting bracket but had to cut it slightly for proper fitment.  I used Glow Shift gauges, your gauges may have a different mounting bracket. 


Be certain to check for fitment in your RX7 FB before purchasing.  Not sure if it fits 1978 - 1980 models or if it fits all RX7 First Generation models.  It must have the 6 1/4 X 2 1/4 inch cut out on the center console.  Be certain to check this before ordering

Fits perfect in my 1982