Description:

Up for grabs is a set of irons, housings, and shaft for a D code block.  Rotors, counterweights, and tension bolts have been used for other projects.  Also not pictured multiple lower intake manifolds, a matching upper intake manifold and throttle body.  


Added photos, these are all from the same engine and all thats really been done to them is a quick rinse with gunk before disassembly and storage.  There is discoloration on the rear iron from where the rear rotor was sitting, however it can't be felt at all so I wouldn't have a problem running it without surfacing.  Step wear barely can be felt by my nail and the edges of the rotor housings are well within spec with a couple less than half MM flakes and a bit of shiny around the circumference.