setup of injectors question
Thread Starter
Full Member
Joined: May 2004
Posts: 192
Likes: 0
From: Santo Domingo, Dominican Republic
setup of injectors question
I have one question... i have 2 x 550cc primary injectors of 13.2 ohms (hi imp)
and 2 x 850cc secundary injectors of 3.~ ohms (low imp)
with ecu n332 this car work perfectly with 4 x 550cc 13.2 ohms (hi imp) this injectors are the stock car injectors...
can this work if I install ressistance in the secundary injectors of 850cc (hi imp) ?
the setup will be 2 x 550cc (hi imp) in primary and 2 x 850cc (low imp) in secundary with ressistance of 10 ohms @10watts...
this will work?
sorry for the english...
and 2 x 850cc secundary injectors of 3.~ ohms (low imp)
with ecu n332 this car work perfectly with 4 x 550cc 13.2 ohms (hi imp) this injectors are the stock car injectors...
can this work if I install ressistance in the secundary injectors of 850cc (hi imp) ?
the setup will be 2 x 550cc (hi imp) in primary and 2 x 850cc (low imp) in secundary with ressistance of 10 ohms @10watts...
this will work?
sorry for the english...
Originally Posted by Cool_ManX
I have one question... i have 2 x 550cc primary injectors of 13.2 ohms (hi imp)
and 2 x 850cc secundary injectors of 3.~ ohms (low imp)
with ecu n332 this car work perfectly with 4 x 550cc 13.2 ohms (hi imp) this injectors are the stock car injectors...
can this work if I install ressistance in the secundary injectors of 850cc (hi imp) ?
the setup will be 2 x 550cc (hi imp) in primary and 2 x 850cc (low imp) in secundary with ressistance of 10 ohms @10watts...
this will work?
sorry for the english...
and 2 x 850cc secundary injectors of 3.~ ohms (low imp)
with ecu n332 this car work perfectly with 4 x 550cc 13.2 ohms (hi imp) this injectors are the stock car injectors...
can this work if I install ressistance in the secundary injectors of 850cc (hi imp) ?
the setup will be 2 x 550cc (hi imp) in primary and 2 x 850cc (low imp) in secundary with ressistance of 10 ohms @10watts...
this will work?
sorry for the english...
Thread Starter
Full Member
Joined: May 2004
Posts: 192
Likes: 0
From: Santo Domingo, Dominican Republic
Originally Posted by KNONFS
Asi mismo, ponle las resistencias, y ya'ta
gracias viejo... tenia esa duda/....
otra pregunta... alguien sabe donde consigo esas resistencias o tiene alguna foto a ver como queda mejor? porque es la primera vez que lo voy a hacer.. y no quiero cometer errores
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM