All i have to say is that these little things can scoot. Coming home around midnight or so i see lil blue headlights creeping awfully fast toward me. I pay it no mind until it starts pacing me for about a mile. It was about this time i notice that "it" is a new bmw 1 series coupe. "Nice car" i think.Since this stuff really gets on my nerves after awhile, i slow down to entice him to go on his way.
As you can guess he doesn't. So i down shift and he immediately takes off. This was done at about a 70 punch and i went from 4th. He gets out there about 1 car length and i will be damned if i'm just barely creeping on him??!!!!****!!
only got to go at it once before he exited.........so my question is this.......are they really that fast or is sumthin acting up in my car??hahah

Mods: Pt-67, haltech e6k, stockport, 10psi, fmic, 720ccx4, etc...

 

Had to have been a 135. It boasts an inline 6 twinturbo 300hp engine. Curb weight is 33-3600lbs i believe, and a quarter mile of 13.3@ 105. Not a bad building block. I bet these things are going to be rockets when modded!


P.S. Loan me a girl in your avatar, I promise to return in decent shape. Some assembly might be required.

 

i will think about the loan.....it requires a non-refundable deposit.

 

sounds good, I will let you borrow my 7 once its put back together and you can dominate the 1 series

Looked at Dinans web site and going from 8.5psi to 13 yields another 84hp, upping it to 384

 

You probably could have fared better if you'd bumped it into 3rd. I'll keep my eyes open for these cars...

 

damn that is a pretty sick engine. "300 hp and 300 lb-ft of torque available at as low as 1,400 rpm."

 

T-67 at 10psi? that turbo is barely breathing man! get some alky injection and crank up the boost.

 

^^^That is the plan.....im not even in the turbos efficiency range......but, after a consultation with bdc i decided on 10 psi for now.

 

Why only run 10?? It seems like that totally defeats the purpose of a single...LOL
And you would have had a much better run in third.

 

I know man!!! imma be bumpin up!!! THanx for the advice!!!