1st kill in the vert... 96 tibby vs. 91 vert n/a
1st kill in the vert... 96 tibby vs. 91 vert n/a
.
Trending Topics
Thread Starter
Rotary Enthusiast
Joined: Jun 2004
Posts: 760
Likes: 0
From: trenton,il
it was a close race but i dropped my car between 6 and 7 grand, i run wanli z rated tires so when i dropped it it barely spun and it launched, i took him off the line by about 2 car legnths and i shifted at the redline buzz to second, looked over and didnt see him on my side so i shifted to third and glanced over my shoulder to notice he was already turning around to reline back up, i get back to where we started and he said ohh i got a bad start lets try it again, i said fine so this time i put my top down so he could see me better, my windows r tinted dark. lol but about the exact same thing happened again i beat him off the line by like 2 car legths, and i held it all the way down to the end.. sorry i didnt give details sooner ive been busy,
as of last nite... i raced this riced out but he said it was modded 2000 cavi, needless to say it was a waste of gas, we lined up out at this old state road that used to be a highway a long time ago, nice ashpalt road two lanes makes almost a perfect 1/4 mile. but back to the race we lined up i dropped it at 7 grand and took off, i heard this weird whining noise which ended up bein him spinning his tires, i smoked him off the line by 4 car legths, and by the time we got down to the end i had him by about 3. we went back into town after that to the shell station where then he told me he prolly coulda had me if he didnt have all his subs and car show stuff in the trunk, i said anytime u wanna run again call me. he said aight
then he left, he is supposed to call this saturday im gonna bring out the camcorder for it .
as of last nite... i raced this riced out but he said it was modded 2000 cavi, needless to say it was a waste of gas, we lined up out at this old state road that used to be a highway a long time ago, nice ashpalt road two lanes makes almost a perfect 1/4 mile. but back to the race we lined up i dropped it at 7 grand and took off, i heard this weird whining noise which ended up bein him spinning his tires, i smoked him off the line by 4 car legths, and by the time we got down to the end i had him by about 3. we went back into town after that to the shell station where then he told me he prolly coulda had me if he didnt have all his subs and car show stuff in the trunk, i said anytime u wanna run again call me. he said aight
then he left, he is supposed to call this saturday im gonna bring out the camcorder for it .
Thread Starter
Rotary Enthusiast
Joined: Jun 2004
Posts: 760
Likes: 0
From: trenton,il
my mods are custom made 2 and 3/4 inch exhaust from the manifold back to two 6 inch outlet magniflow performqance cannons, also running bosch wires with denso iridium plugs, and k&n,. as for rims and tires im running eagle alloy 17's with wanli 205/40zr17 tires..no other mods, 102 grand on the car
Thread Starter
Rotary Enthusiast
Joined: Jun 2004
Posts: 760
Likes: 0
From: trenton,il
also just found out my 5th and 6th ports rnt opening... BECAUSE I HAVE NO AIR PUMP~! didnt bother too look and see if ones there figured id have one lol i felt like a newbie lol so now we r gonna tear apart the intake and clean my ports and put the air pump back on, hopefully itl work
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM