A Short Introduction
Thread Starter
Junior Member
Joined: May 2016
Posts: 2
Likes: 0
From: Seattle, WA
A Short Introduction
Hi guys and gals!
I'm Alex! I'm 1/4 Chinese, 1/4 Filipino, 1/4 Spanish, and 1/4 Irish. I'm 25 this year, which also happens to mark my 10 year anniversary of being in the car scene. I previously was heavily involved in the show scene, and have recently made a transition into the drift scene. I was originally suggested by my friend Matt to come here and read as much information as I could. I started out with Icemark's FAQ and moved to aaroncake's RX-7 website.
I've also just started a YouTube channel shooting videos, tutorials (eventually), and generally trying to promote drift culture in a positive light (I don't approve of hooning, keep it at the track!) Here is a link to my first video titled "#QuitMyJob2Drift - A Documentary - Episode 1" I'm very excited to purchase a new camera soon, so I can work on my film technique and editing technique (and not have to use an iPhone). If you have any recommendations, or advice on how to improve my technique, by all means feel free to comment here or send me a PM! I'm sure there a bunch of film guys on this forum.
I am interested in not only purchasing an FC, but learning as much as I can about the rotary platform. I did learn that the rotary design was originally produced in Germany by Herman Wankel. I hope to return the knowledge that I acquire here back to my local community one day in hopes that I can pay it forward.
I currently daily drive a 1997 Mercedes-Benz W140 S500 with a few mods. I'll list them below the post if anyone is interested. I can also give some advice and maybe a few helpful tips on how to work on them/get parts.
Here's a picture of me and my benz:
A list of my benz's mods:
Rare Renntech Carbon Fiber Dual Intake Airbox
6 Piston BBK with drilled and slotted rotors
Brand new pads in the rear
Steel braided brake lines
H&R springs and Bilstein Struts
Motegi multispoke 18" wheels
Brand new Continental tires
Full performance exhaust system
Super rare "Black Ice" Little Tree air-freshener (JDM Edition)
Audio:
Pioneer AVH-X7700BT 7" Touchscreen
Focal Access 165 A3 3 Way Components
Focal Access 165 A1 6.5" Components
JL Audio XD400/4 V2 Class D 4 Channel Amp
JL Audio 1000/1 V2 Monoblock Amp
2x JL Audio 10W6v2-D4 10" subs in a custom fibreglass box (sealed)
Kinetic HC1400-Blu second battery
0ga Battery wiring and 4ga amp wiring
Shielded RCA's run through factory grommets
Completely hidden install, using factory mounting points including amps.
I'm Alex! I'm 1/4 Chinese, 1/4 Filipino, 1/4 Spanish, and 1/4 Irish. I'm 25 this year, which also happens to mark my 10 year anniversary of being in the car scene. I previously was heavily involved in the show scene, and have recently made a transition into the drift scene. I was originally suggested by my friend Matt to come here and read as much information as I could. I started out with Icemark's FAQ and moved to aaroncake's RX-7 website.
I've also just started a YouTube channel shooting videos, tutorials (eventually), and generally trying to promote drift culture in a positive light (I don't approve of hooning, keep it at the track!) Here is a link to my first video titled "#QuitMyJob2Drift - A Documentary - Episode 1" I'm very excited to purchase a new camera soon, so I can work on my film technique and editing technique (and not have to use an iPhone). If you have any recommendations, or advice on how to improve my technique, by all means feel free to comment here or send me a PM! I'm sure there a bunch of film guys on this forum.
I am interested in not only purchasing an FC, but learning as much as I can about the rotary platform. I did learn that the rotary design was originally produced in Germany by Herman Wankel. I hope to return the knowledge that I acquire here back to my local community one day in hopes that I can pay it forward.
I currently daily drive a 1997 Mercedes-Benz W140 S500 with a few mods. I'll list them below the post if anyone is interested. I can also give some advice and maybe a few helpful tips on how to work on them/get parts.
Here's a picture of me and my benz:
A list of my benz's mods:
Rare Renntech Carbon Fiber Dual Intake Airbox
6 Piston BBK with drilled and slotted rotors
Brand new pads in the rear
Steel braided brake lines
H&R springs and Bilstein Struts
Motegi multispoke 18" wheels
Brand new Continental tires
Full performance exhaust system
Super rare "Black Ice" Little Tree air-freshener (JDM Edition)
Audio:
Pioneer AVH-X7700BT 7" Touchscreen
Focal Access 165 A3 3 Way Components
Focal Access 165 A1 6.5" Components
JL Audio XD400/4 V2 Class D 4 Channel Amp
JL Audio 1000/1 V2 Monoblock Amp
2x JL Audio 10W6v2-D4 10" subs in a custom fibreglass box (sealed)
Kinetic HC1400-Blu second battery
0ga Battery wiring and 4ga amp wiring
Shielded RCA's run through factory grommets
Completely hidden install, using factory mounting points including amps.
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Welcome..Rock on..lol!
By the way just to set ya straight..FELIX Wankel invented the Rotary...Unless "Herman" was Felix's alter Ego............................................... I'm Batman..Mwuahhahahaha!
By the way just to set ya straight..FELIX Wankel invented the Rotary...Unless "Herman" was Felix's alter Ego............................................... I'm Batman..Mwuahhahahaha!
Thread Starter
Junior Member
Joined: May 2016
Posts: 2
Likes: 0
From: Seattle, WA
Show's how much I know lmao. But yeah, ok. FELIX not Herman. Maybe Herman was like Felix's brother or something.
I for one will be the first to say the reason that I'm here is that I don't know ****. I WANNA learn, which is why I've spent the last 6 hours digging through threads.
THIS SITE IS RAD
I for one will be the first to say the reason that I'm here is that I don't know ****. I WANNA learn, which is why I've spent the last 6 hours digging through threads.
THIS SITE IS RAD
Thread
Thread Starter
Forum
Replies
Last Post