Rx8 with rx7 13bt conversion
11-10-18, 12:36 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2018
Location: South Africa
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Rx8 with rx7 13bt conversion
My set up so far
Hi guys I'm from south Africa. Need some help with my set up . Hopefully I can push some high numbers down here in SA
11-10-18, 12:44 PM
#2
Junior Member
Thread Starter
Join Date: Nov 2018
Location: South Africa
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
11-11-18, 01:27 AM
#5
Junior Member
Thread Starter
Join Date: Nov 2018
Location: South Africa
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys
She's someone else's unfinished project. Got a lot of problems to work through but IL explain in the technical help section.
+it's a complete rx7 motor swop single turbo
+She's been ported to stage 3. street port
+3mm racing apex seals
+T4 knock of turbo [replacing with 750hp precision turbo]
+spitstronic fuel management system
+new electronic fuel pump to feed larger injectors
+standard gearbox
+new Mazda b150 bakkie clutch pressure plate and release bearing the springs are tighter fit. Works perfect more bite
+standard 6 speed box
+75mm straight through pipe with 2 boxes at the back
My plans
Bigger turbo
Definitely needs tuning
New down pipe as it's leaking
Reposition of turbo
50mm BOV
New set up on turbo and intercooler pipes. [looks a bit odd as it's done at the moment ] plus has a vacuum leak somewhere in system
That's all I remember for now
Thanks
+it's a complete rx7 motor swop single turbo
+She's been ported to stage 3. street port
+3mm racing apex seals
+T4 knock of turbo [replacing with 750hp precision turbo]
+spitstronic fuel management system
+new electronic fuel pump to feed larger injectors
+standard gearbox
+new Mazda b150 bakkie clutch pressure plate and release bearing the springs are tighter fit. Works perfect more bite
+standard 6 speed box
+75mm straight through pipe with 2 boxes at the back
My plans
Bigger turbo
Definitely needs tuning
New down pipe as it's leaking
Reposition of turbo
50mm BOV
New set up on turbo and intercooler pipes. [looks a bit odd as it's done at the moment ] plus has a vacuum leak somewhere in system
That's all I remember for now
Thanks
11-11-18, 12:58 PM
#7
Junior Member
Thread Starter
Join Date: Nov 2018
Location: South Africa
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dane Labuschagne
Single Turbo RX-7's
7
11-25-18 08:58 AM
petree_777
2nd Generation Specific (1986-1992)
34
05-01-13 11:55 AM
Rx7supra
2nd Generation Specific (1986-1992)
2
03-18-02 07:28 PM