Introduce yourself New members post about yourself here...

RFourton

Thread Tools
 
Search this Thread
 
Old Jul 26, 2011 | 03:12 AM
  #1  
Rfourton's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Jul 2011
Posts: 1
Likes: 0
From: Texas
TX RFourton

Hey I;m not new to RX7's but this Gen1 Carb version i am. Been in electronics all my life, have had 3 Rx's a 1984 Fi, 85 fi and now a 84 Carb version, live in DFW area, I have loved Rx's since my first in 1984, easy to manuver, quick, and not too bad on gas. I like Harleys, scuba, wrenching on sports cars but this one has me stumped.
I've had 3 rx's.got a gen 1 now was running good, lost a tps, then an igniter,thought all would be well, had already been then thru carb, then lost shutter valve diaphram blew, so i blocked it off, went thru carb again, set up floats with digital caliper to specs ,61-.65 one way and 1.99 "-2.01 other side cleaned all and runs like crud, think my needles stuck too or filter clogged,bowls were clean,blew out all jets,!@#$ will look at float needles and change filter tomorrow,will a bad alc restricter in line cause these problems, it idles rough, starves under load no power, was running much better before stutter valve blew and I went in. its killing me, also gas mleage went from about 22-25 to 13-15 mpg any ideas?
Reply
Old Jul 29, 2011 | 11:25 AM
  #2  
funkjaw's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (3)
 
Joined: Jul 2008
Posts: 2,515
Likes: 4
From: San Jose, CA (NorCal/S.F. Bay Area)
Welcome to the forum

Feel free to ask around in the new member technical section or search for your answers. I'm sure this has been encountered before.
Reply
Old Jul 29, 2011 | 02:08 PM
  #3  
sebax1_R1's Avatar
Full Member
Tenured Member: 15 Years
iTrader: (15)
 
Joined: May 2011
Posts: 229
Likes: 0
From: Fort-Worth, Texas
Welcome
Reply




All times are GMT -5. The time now is 07:38 AM.