NZ - FC that is currently a rolling body
#1
Newbie
Thread Starter
Join Date: Sep 2012
Location: New Zealand
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
NZ - FC that is currently a rolling body
Hi there - I recently bought my first rotor, did a bit of research (which is how I found this site) and looked around before I decided on a bridgey FC. Long story short I got about a quarter of the way through a 1232km (750mile) journey and it overheated. So now I have an Rx7 FC rolling body sitting on my lawn with a blown water seal between the front housing/plate and due to the amatuer porting job a set of useless plates and undersized housings thanks to shrinkage
- Ben from New Zealand
- Ben from New Zealand
#4
Can Post Only in New Member Section
Join Date: Dec 2015
Location: auckland
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi there - I recently bought my first rotor, did a bit of research (which is how I found this site) and looked around before I decided on a bridgey FC. Long story short I got about a quarter of the way through a 1232km (750mile) journey and it overheated. So now I have an Rx7 FC rolling body sitting on my lawn with a blown water seal between the front housing/plate and due to the amatuer porting job a set of useless plates and undersized housings thanks to shrinkage
- Ben from New Zealand
- Ben from New Zealand
intrested in selling it as is?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post