Introduce yourself New members post about yourself here...

New member from Texas

Old Oct 31, 2015 | 01:04 PM
  #1  
gunmetalblue2010's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Oct 2015
Posts: 4
Likes: 0
From: Texas
TX New member from Texas

Hey yall, Im Julio and I live in Austin Texas. I recently purchased a non running 1989 Mazda RX7 S5 Turbo. Wanted a sports car and thought I should make me a project car and I've always wanted one of these cars. It has 124k with 90K on a motor from Japan. I don't know much about how to work on cars but im determined to learn. Starting to buy parts to work on it and first step is to change out the fuel lines. Anyone have experience with this im all open ears on tips and tricks.
Reply
Old Oct 31, 2015 | 05:40 PM
  #2  
DocHoliday89's Avatar
Senior Member
Veteran: Coast Guard
iTrader: (10)
 
Joined: Jan 2013
Posts: 253
Likes: 5
From: Richmond, VA
Does the engine turn over or start? If so, do a compression test. You can get a compression tester from Advance Auto. Remove the check valve from the tester before doing the test.

"How to" video:
https://m.youtube.com/watch?v=AL4DLzCO_qo
Reply
Old Oct 31, 2015 | 07:39 PM
  #3  
gunmetalblue2010's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Oct 2015
Posts: 4
Likes: 0
From: Texas
Originally Posted by DocHoliday89
Does the engine turn over or start? If so, do a compression test. You can get a compression tester from Advance Auto. Remove the check valve from the tester before doing the test.

"How to" video:
https://m.youtube.com/watch?v=AL4DLzCO_qo
Thanks! I forgot to add the guy I bought it from said it turns but he thinks it wasn't getting enough fuel to the engine. He told me he recommended replacing the fuel lines and possibly the fuel tank. Im slowly getting parts to get it replaced. Was trying to find out where i could get stainless steel lines because I want to track the car out eventually.
Reply
Old Nov 1, 2015 | 02:09 AM
  #4  
DocHoliday89's Avatar
Senior Member
Veteran: Coast Guard
iTrader: (10)
 
Joined: Jan 2013
Posts: 253
Likes: 5
From: Richmond, VA
I wouldn't start spending my money on SS lines yet. Just replace all the rubber fuel hose with some quality new rubber fuel hose. If the motor doesn't make compression then your fuel system won't matter 😉

Id imagine the tank is fine so Long as there is t a hole in it.
Reply
Old Nov 5, 2015 | 11:59 AM
  #5  
gunmetalblue2010's Avatar
Thread Starter
Can Post Only in New Member Section
 
Joined: Oct 2015
Posts: 4
Likes: 0
From: Texas
Thanks for the tip! Im going to take it down and put a normal rubber hose in it and see if that does the trick.
Reply
Old Nov 6, 2015 | 02:10 PM
  #6  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
Originally Posted by gunmetalblue2010
Thanks for the tip! Im going to take it down and put a normal rubber hose in it and see if that does the trick.
Normal hose..NO!
you'll need to replace the fuel lines with HIGH PRESSURE fuel lines not any regular hose.

NOTE: any more TECHNICAL questions can be asked IN Tech where they should rightfully be.
Good luck.
Reply
Old Nov 9, 2015 | 12:03 PM
  #7  
Sudowoodo's Avatar
Lube has no limit.
Tenured Member 05 Years
iTrader: (1)
 
Joined: Oct 2012
Posts: 264
Likes: 1
From: Fort Walton Beach, FL
Hey I'm from right around Austin, TX! I'm stationed in Florida right now but I visit the Austin area pretty often. Maybe if I'm in town with nothing to do I can come help out if you're still having issues? Haha. I second styx though, the tech section will get a lot more exposure to people that can really help you out. It's always best to try and diagnose the problem before throwing money and parts at the car. I've learned from experience all too well.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:59 PM.