New Member From Mn!
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2013
Posts: 11
Likes: 0
From: Burnsville, Minnesota
New Member From Mn!
Hey guys/gals.... My name is Cody.
First time on here. I just picked up a 1994 Rx7 thats going to be needing a lot of work but was well worth the price of $400 that i payed for it.
Before this rx7 I have owned numerous Nissan 240sx's, that had anything from a ka24e/de to sr20det to rb25det. As you can probably tell from my user name I will be drifting this fd. Plans are to have it ready to go in about a year or 2. My daily car is a 2001 gs300 with stance coilovers and 20inch Mrr Hr3's
I will be looking for a whole lot of parts for my fd and also some info and input for making this thing quite the beast of a drift car. Any info and tips would be great.
Anyways thanks for letting me on this site and hopefully it all works out!
First time on here. I just picked up a 1994 Rx7 thats going to be needing a lot of work but was well worth the price of $400 that i payed for it.
Before this rx7 I have owned numerous Nissan 240sx's, that had anything from a ka24e/de to sr20det to rb25det. As you can probably tell from my user name I will be drifting this fd. Plans are to have it ready to go in about a year or 2. My daily car is a 2001 gs300 with stance coilovers and 20inch Mrr Hr3's
I will be looking for a whole lot of parts for my fd and also some info and input for making this thing quite the beast of a drift car. Any info and tips would be great.
Anyways thanks for letting me on this site and hopefully it all works out!
I am also a new member from Minnesota. I am new to rotary motors. I have a 70's mgb I have been working on for a bit, after doing some research, I purchased a 84 rx with a 12a to transplant. I hope to swap the motor, tranny and rear out of the rx7 and into the rx. I plan on rebuilding the 12a and porting it.
Trending Topics
Dave,
If you we're asking me, yes I did. I was really surprised at the condition of the car. It has been sitting for some time but is in very good condition. Other than the motor being partially disassembled and a dented front fender, there isn't much wrong with it, no rust at all. I also picked up a extra set of tires, complete intake and carb, header and exhaust, and many other parts. I really am contemplating selling the b and keeping this. A roadster would be cool and it would probably come in a few hundred pounds less.
If you we're asking me, yes I did. I was really surprised at the condition of the car. It has been sitting for some time but is in very good condition. Other than the motor being partially disassembled and a dented front fender, there isn't much wrong with it, no rust at all. I also picked up a extra set of tires, complete intake and carb, header and exhaust, and many other parts. I really am contemplating selling the b and keeping this. A roadster would be cool and it would probably come in a few hundred pounds less.
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2013
Posts: 11
Likes: 0
From: Burnsville, Minnesota
I bought mine from a buddy of mine that bought it about 2 years ago and hasn't touched it. ill post pics when the snow is gone and i can get it back to my house..... Lexus resides in the garage currently, wont let her see winter
$400 for an FD! Wow that is unheard of...
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2013
Posts: 11
Likes: 0
From: Burnsville, Minnesota
Yea it was too good of a price to pass up on, even with getting married in august. Especially when the fiance isnt wanting to spend a whole lot of money..... oh well! Here's to racking up the credit cards!
Thread
Thread Starter
Forum
Replies
Last Post