Heloo
#1
Newbie
Thread Starter
Join Date: Jul 2020
Location: Aruba
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Heloo
Heloo fellow rotaz,
my name is brian i live in Aruba
i own a 95 FD
13b rew half bridge , 850 pri 2200 sec T70/.96 on microtech.
car was ported and rebuild by me and it already started
now just waiting for a basemap and some parts to get goin!!
my name is brian i live in Aruba
i own a 95 FD
13b rew half bridge , 850 pri 2200 sec T70/.96 on microtech.
car was ported and rebuild by me and it already started
now just waiting for a basemap and some parts to get goin!!
#4
Newbie
Thread Starter
Join Date: Jul 2020
Location: Aruba
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I dont have much pictures, it has been sitting for 7 years and the engine rebuild was done in 2015 till now we finished and started it on stock injectors
After it started I did some polishing in the engine compartment still pending some minor parts to begin breakin process..
I’m an aircraft mechanic and the only reason i got into rotary was to learn and experiment myself on the engine. And YESS i did buy ebay stuff Mostly mechanical parts..
Flying onboard and living abroad made me delay so much in the project, but now im back on it back at home ready to brap!
Some specs:
T70 .96ar ebay turbo , ACT extreme stage 3 clutch
engine is half bridge, notched housings 2mm RA superseals/springs , atkins solid cornerseals Atlins cryo side seals ,mazdatrix racing bearings ,new Factory oil pump
on microtech LT 10s ,new bosch coils and wires, stock cleaned flow matched 850pri +raceworks 2200sec’s walbro 400lph pump
aim is 400/450 hp street ac chill car
Also have HKS twin power/Ls1 coils power fc ecu as spare if needed
Back in 2015 when i did the rebuild in my work office, and soon after i changed the engine color to black/chrome.
As it sits awaiting piping+new bov and miscellaneous stuff.. I plan on keeping powersteering ABS and AC
After it started I did some polishing in the engine compartment still pending some minor parts to begin breakin process..
I’m an aircraft mechanic and the only reason i got into rotary was to learn and experiment myself on the engine. And YESS i did buy ebay stuff Mostly mechanical parts..
Flying onboard and living abroad made me delay so much in the project, but now im back on it back at home ready to brap!
Some specs:
T70 .96ar ebay turbo , ACT extreme stage 3 clutch
engine is half bridge, notched housings 2mm RA superseals/springs , atkins solid cornerseals Atlins cryo side seals ,mazdatrix racing bearings ,new Factory oil pump
on microtech LT 10s ,new bosch coils and wires, stock cleaned flow matched 850pri +raceworks 2200sec’s walbro 400lph pump
aim is 400/450 hp street ac chill car
Also have HKS twin power/Ls1 coils power fc ecu as spare if needed
Back in 2015 when i did the rebuild in my work office, and soon after i changed the engine color to black/chrome.
As it sits awaiting piping+new bov and miscellaneous stuff.. I plan on keeping powersteering ABS and AC
Thread
Thread Starter
Forum
Replies
Last Post