When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
hey guys. ill keep it simple! picked up my dream car a month or two ago and just been getting to work on it!
mods:
Mild street port
Non sequential twins
Sakebomb steel brake lines
Sakebomb Hid projectors
Greddy V-Mount kit
Walboro 450 LPH Fuel Pump
SBG Competition Electric Water Pump Kit
IG-1A High Performance Ignition System
13B Full Function Fuel Kit
Apexi Power Intake
Apexi Power FC + Commander
Koyo Aluminum Radiator
99 Spec Tail Lights
Thanks! The interior was in shambles when I got it. the first thing i did was actually repair all of it, sand it down, and repaint it. now im just waiting for bubbletech replacement handle. and itll mostly be done!
Shoot i forgot to take some before shots! but I have some pictures of restoring some of the parts! Here is what I had to do:
Fix center console tabs, sand and repaint
fix hvac **** from spinning in place, fix tabs, sand and repaint
replace the entire broken gauge cluster hood
took off the plastic guage lenses and sanded the deteriorating chrome ring (then polished the black plastic)
repaired the tachometer
replaced burnt various interior bulbs
took out the turbo timer that had wiring everywhere and cleaned it up
fixed the glove box from flaring out and fixed the switch from it being on all the time
fix the tabs on the extra plastic pieces on the side (where it vents to the door)
replaced all the door tabs with new ones. sanded and painted the plastic trim.
super glue the shattered plastic arm rest back into one piece (dont know how long that will last)
replaced a lot of the hardware that went missing.
replaced the leather boot
thats most that I can think of off the top of my head! I dont have much pictures of the progress, but there is some!
Last edited by itzzspencer; Jan 31, 2020 at 10:28 PM.
First time rotary owner. super excited
