ElDudo - New From Arizona...
#1
"The" Dudo
Thread Starter
Join Date: Jan 2011
Location: Phoenix
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
ElDudo - New From Arizona...
...sort of. I have been around in AZ on the Arizona Mazda Club forum forever. I figured now that I am a rotary engine owner I should start posting over here.
I have a couple of Mazdas in my stable.
The first is my trusty daily driver and former Auto-X car a 2003 Mazda Protege. I have done a ton of work to this car transforming it from a crappy base model to essentially a 2003 spec Mp3, with upgraded brakes and ECU.
I have a 1983 RX7 GSL that I am bringing back to life, the car is 99% there, and surprisingly most of the stuff on it still works despite its age. I have a spare 12A that I need to take apart port and rebuild then it will be going into the engine bay. As the car sits now it is bone stock except for a K&N Air Filter.
Lastly, I have a 1977 REPU that is in a sad state visually, the bed has been in a minor fender bender and there are dings on both doors. Mechanically the thing is fine, I just need to piece together an exhaust for it and get the taillight wiring all back together then it should be able to be registered.
Anyway, those are my rides.
Cheers
I have a couple of Mazdas in my stable.
The first is my trusty daily driver and former Auto-X car a 2003 Mazda Protege. I have done a ton of work to this car transforming it from a crappy base model to essentially a 2003 spec Mp3, with upgraded brakes and ECU.
I have a 1983 RX7 GSL that I am bringing back to life, the car is 99% there, and surprisingly most of the stuff on it still works despite its age. I have a spare 12A that I need to take apart port and rebuild then it will be going into the engine bay. As the car sits now it is bone stock except for a K&N Air Filter.
Lastly, I have a 1977 REPU that is in a sad state visually, the bed has been in a minor fender bender and there are dings on both doors. Mechanically the thing is fine, I just need to piece together an exhaust for it and get the taillight wiring all back together then it should be able to be registered.
Anyway, those are my rides.
Cheers
#2
"The" Dudo
Thread Starter
Join Date: Jan 2011
Location: Phoenix
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I was trying to post in the other areas of the forum, but my post count is too low.
Had a good time at SevenStock. It was good to meet some new faces and get to know everybody!
Had a good time at SevenStock. It was good to meet some new faces and get to know everybody!
#6
"The" Dudo
Thread Starter
Join Date: Jan 2011
Location: Phoenix
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I went broke spending money on stuff at SevenStock looking forward to getting the RX7 in better shape aesthetically for next year. Gonna try to get the REPU up and running for next year too.