Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Which Wire?

Thread Tools
 
Search this Thread
 
Old Sep 12, 2002 | 08:51 PM
  #1  
Avatar's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Jul 2002
Posts: 248
Likes: 0
From: Australia
Which Wire?

Which wire is for what (FC3 Jap import)
Reply
Old Sep 12, 2002 | 09:18 PM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Posted quite a few times, you may wish to use the search function found up in the right hand corner, next time...

here's the radio wires again...

LTBlue/Red= 12v+
LtBlue/White= +Accessory
LtBlue/Yellow= - power ant trigger (not positive like all aftermarket radios- you must use a relay to invert the signal)
Red/Black= + Lumination
White=Factory Amp Turn on

Ground to the body, use the 10mm bolt behind the center console front drivers access panel. Do not use the Red/Black as ground it will damage the interior light circuit and dimmer in the car

Front Speakers (maximum of a 15 watt peak from the radio):
LtGreen/Red= Left
LtGreen/Black= Left

LtGreen= Right
LtGreen/Yellow=Right

Rear Speakers (if applicable, if you have the amplified rear speakers again the Maximum of 15 watts peak is all the stock speaker amp input can handle):
Brown= Left rear
Brown/White= Left Rear

LtBlue= Right Rear
LtBlue/Orange=Right Rear
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
Mar 20, 2018 01:54 PM
DocHoliday89
3rd Generation Specific (1993-2002)
5
Oct 12, 2015 07:42 PM
FC3S_nataku
2nd Generation Specific (1986-1992)
4
Sep 15, 2015 12:36 PM
cosmo7
West RX-7 Forum
2
Sep 14, 2015 09:47 PM




All times are GMT -5. The time now is 06:34 AM.