Will shifter hit monitor built into head unit? (FC)
It's never fast enough...
Joined: Feb 2001
Posts: 3,760
Likes: 3
From: Miami - Given 1st place as the POOREST city in the US as per the federal government
Naa.
I know a guy with a 3rd gen with that setup and it doesn't seem to hit it, but he DID have the short throw shifter, though.
Just psuh your shifter forward and measure the distance from the **** to the dash. Then measure how much a screen protudes out of the unit. That should give ya a good indication, no?
I know a guy with a 3rd gen with that setup and it doesn't seem to hit it, but he DID have the short throw shifter, though.
Just psuh your shifter forward and measure the distance from the **** to the dash. Then measure how much a screen protudes out of the unit. That should give ya a good indication, no?
Da Monee Pit
Joined: Dec 2001
Posts: 843
Likes: 0
From: Littlefield, Texas
I'm getting a Clarion VRX815 installed right now but never really thought about checking it. Just thinking though The shifter will need to be in 2, or 4th when the screen is being opened but I don't think I will have any problems hitting at all once it is opened and upright. I'll let ya know soon as I find out. I'll check with em, tommorow morning and see how it's going.
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Joined: Jul 2001
Posts: 3,383
Likes: 3
From: Stinson Beach, Ca
Originally posted by West TX RX-7
I'm getting a Clarion VRX815 installed right now but never really thought about checking it. Just thinking though The shifter will need to be in 2, or 4th when the screen is being opened but I don't think I will have any problems hitting at all once it is opened and upright. I'll let ya know soon as I find out. I'll check with em, tommorow morning and see how it's going.
I'm getting a Clarion VRX815 installed right now but never really thought about checking it. Just thinking though The shifter will need to be in 2, or 4th when the screen is being opened but I don't think I will have any problems hitting at all once it is opened and upright. I'll let ya know soon as I find out. I'll check with em, tommorow morning and see how it's going.
Trending Topics
Da Monee Pit
Joined: Dec 2001
Posts: 843
Likes: 0
From: Littlefield, Texas
Ok, I got my car back tonight and took some pictures but I haven't installed my camedia software on my pc since my win XP install. I'll search for the install disk and try to get some pics posted late tonight or tommorow morning.
It does not hit at all when opened up for viewing and I have plenty of room for shifting. It will just barely clear in neutral opening and closing it.
It does not hit at all when opened up for viewing and I have plenty of room for shifting. It will just barely clear in neutral opening and closing it.
Da Monee Pit
Joined: Dec 2001
Posts: 843
Likes: 0
From: Littlefield, Texas
Ok heres a couple of pics.
This is in neutral and the screen is at full extension just before flipping up. About 1/8 of an inch to spare.
-----------------------------------------------------------------------------------
This is in 3rd gear with the screen up in viewing position. I have plenty of room to shift.
This is in neutral and the screen is at full extension just before flipping up. About 1/8 of an inch to spare.
-----------------------------------------------------------------------------------
This is in 3rd gear with the screen up in viewing position. I have plenty of room to shift.
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
May 25, 2016 12:42 PM
