Sorry if this has been asked before, i did a search but theres a lot of threads on seats

Sparco Fighter.

Dont want to have to go modifying my interior to get these to fit, just want some simple drop in seats

Link:
http://www.demon-tweeks.co.uk/catalo...52&from=search

Pic:



Many thanks

Ryan

 

If you want easy drop-in, you need to be looking at Corbeau. They are the only ones that make brackets specifically for FDs. Well, Recaro Japan does as well but they are $$$$.

And no, the Sparco Fighter won't fit, the shoulder wings are too wide. Check out the Corbeau CR-1 for a very good street/track seat. If you're set on Sparcos, look at the Milano, it's a little narrower than the Fighter.

If you are looking for pure race seats instead, try the Corbeau Forza or Sparco Sprint/Ultra.

Of course, there's always the Recaro SPG if you want to spend more.....

 

Rybrx:
You need to remove your passenger seat (w brackets)
Measure the area where the seats are mounted and compare it with the seats dimensions.
Passnger seat area is smaller than the driver's (don't ask me how I know)
Most racing seats will fit but you may have some rubbing at the seat's widest shoulder area with the door panels.
Good luck!

 

Rybrx:
You need to remove your passenger seat (w brackets)
Measure the area where the seats are mounted and compare it with the seats dimensions.
Passnger seat area is smaller than the driver's (don't ask me how I know)
Most racing seats will fit but you may have some rubbing at the seat's widest shoulder area with the door panels.
Good luck!

 

Hey but howabout the Bride EXAS 3?? Will those drop in an FD?? Don't u get mounting brackets for those?

 

Sparco Milanos are a very tight fit.

 

i have the sparco roadsters and they rub the doors and have put dents in my doors.