Where do the wires go?
#1
bone stock vert
Thread Starter
Join Date: Nov 2004
Location: granbury Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Where do the wires go?
when the wires for the door and windows go through the body, do they go into a connector or do the all go different places.
I am having a electrical problem with my power windows on a 88 Vert, I believe the power is shorting somewhere in the harness causing power to the window motor somewhere after it leaves the door but so many wires are near the fuse panel I can not find where they are spliced or connected together. I had power to the motor even without any switches in place, power was available to the window motor regardless of where the switch position was when I hooked it up, now I have no power to the motor at all, Please give me a direction to start?
Thanks
I am having a electrical problem with my power windows on a 88 Vert, I believe the power is shorting somewhere in the harness causing power to the window motor somewhere after it leaves the door but so many wires are near the fuse panel I can not find where they are spliced or connected together. I had power to the motor even without any switches in place, power was available to the window motor regardless of where the switch position was when I hooked it up, now I have no power to the motor at all, Please give me a direction to start?
Thanks
#2
Pimp Cowboy
Join Date: Jun 2004
Location: Republic of Texas
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I had to take the switch/control assembly apart ( a bunch of tin rocker conductors will fall out ) clean all that **** up with a good chemical componate cleaner for electronics * I like PUREtronics. Good cleaner, GREAT BUZZ.
Assemble and enjoy healthy power window operation.
* Just noticed yer a local. I have the FSM on CDROM for yer ride. PM me.
Assemble and enjoy healthy power window operation.
* Just noticed yer a local. I have the FSM on CDROM for yer ride. PM me.
Last edited by Convertible Cowboy; 01-08-05 at 09:32 AM.
#3
bone stock vert
Thread Starter
Join Date: Nov 2004
Location: granbury Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
I am in granbury and would love to have a FSM.
I am miffed over this window, I had power to the motor without either switch hooked up?? when I hooked up the switches nothing?
I am miffed over this window, I had power to the motor without either switch hooked up?? when I hooked up the switches nothing?
#5
bone stock vert
Thread Starter
Join Date: Nov 2004
Location: granbury Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I have that. My problem is that I have power to the motor with no switch installed, all I can figure is that I have a bad wire somewhere in the harness , unless someone has some other ideas or experiance with a simular problem....I am sooo lost, any help would be apppreciated
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM