turbo timer and alarm
#1
Rotary Enthusiast
Thread Starter
turbo timer and alarm
okay i included this in one of my old topics but didnt get much info. i now know what alarm and turbo timer i want but dont know if they can go together or if anyone can install it. here is the gear. HKS type 1 turbo timer and viper ES600 alarm. i want both of these but the guy at circuit city didnt know how to install. he wasnt the installer just a sales man. i may also check out good guys. let me know guys. i really need an alarm and
turbo timer.
kris
93 touring(red)
turbo timer.
kris
93 touring(red)
#2
Former Moderator. RIP Icemark.
yes they can go together, all DEI alarms (like Viper/Python/Sidewinder etc) can be armed while the ignition is on, you just have to hold the remote for more than 1.5 seconds.
If you get a better than average installer he can also wire up a simple relay that bypasses the alarms ignition input while the turbo timer is on.
If you get a better than average installer he can also wire up a simple relay that bypasses the alarms ignition input while the turbo timer is on.
#4
Former Moderator. RIP Icemark.
most better quality alarms do not have a current draw circuit (which monitors change in current draw anyway, not consistent current draw) and the engines should not be setting off a shock/motion sensor unless there are set incorrectly.
Thread
Thread Starter
Forum
Replies
Last Post