Which Sweep on Guages?
#1
Rotary Freak
Thread Starter
iTrader: (3)
Join Date: Feb 2002
Location: MN
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
Which Sweep on Guages?
I'm looking to buy Oil Temp, Oil Pressure, and Water Temp guages for my S5 n/a, I was qurious what sweet for the needle do I need to buy?
I am looking at the Autometer Ultra-lite series, and they have these guages in 3 diff sweep veriations. Their relative price to each other is not an issue, I just need to know which will give me the best accuracy for the temp and pressure range my car will spend most of its time in.
Thanks
I am looking at the Autometer Ultra-lite series, and they have these guages in 3 diff sweep veriations. Their relative price to each other is not an issue, I just need to know which will give me the best accuracy for the temp and pressure range my car will spend most of its time in.
Thanks
#3
Ex fd *****
In the ULTRA LIGHT series The MECHANICAL guages are 270deg sweep, and the ELECTRONIC ones are 90deg, Autometer is adding some "FULL" (270deg) sweep electronic guages but I don't think any of them are in the ultra lite series.
#5
Ex fd *****
My personal pref is to use Mechanical Guages for PRESSURE and ELECTRONIC For Temprature - For a Rotary, the OIL pressure Guage needs to read to at LEAST 120psi - the only AUTOMETER Oil Press guage that goes over 100psi is Mechanical (0-150psi).
Also the Presure guage moves through a Wide range and varise quickly with changes in RPM., so a LONGER sweep is more important, the TEMP guages operate over a smaller range and the rate of change is slower so a Shorter sweep is OK.
Also the Presure guage moves through a Wide range and varise quickly with changes in RPM., so a LONGER sweep is more important, the TEMP guages operate over a smaller range and the rate of change is slower so a Shorter sweep is OK.
Last edited by maxpesce; 10-21-02 at 10:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-16-15 09:07 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM