Sparco wheel to MOMO hub
Sparco wheel to MOMO hub
Does anybody know if this setup will work, I plan to get a Sparco ring suede wheel and already have a MOMO hub on the car, so I was wondering if I need to change my hub.
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
I believe the bolt pattern is the same, but it's offset from each other...
It'll make sense once you look at the steering wheels.
You'll just need to reseat the hub 30-degrees either way, and you should be okay.
-Ted
It'll make sense once you look at the steering wheels.
You'll just need to reseat the hub 30-degrees either way, and you should be okay.
-Ted
Burning up Time
Joined: Sep 2004
Posts: 805
Likes: 2
From: Earth
Exact setup I have(on a 2nd. gen. but regardless both use the same momo hub ),works good.If you are using the sparco horn you have to add a bolt to the momo hub(use one of the default holes on the hub with a ring terminal) to ground the horn.No big deal.
