Sound deadening for a bare shell
#1
No distributor? No thanks
Thread Starter
iTrader: (6)
Join Date: Oct 2003
Location: Outskirts of Road Atlanta
Posts: 3,438
Likes: 0
Received 6 Likes
on
4 Posts
Sound deadening for a bare shell
I've got my RX-2 as a bare shell and want to put some aluminum-backed liner inside to keep the heat and noise down. What do you guys reccomend that won't break the bank? I'd like to use some no-name Dynamat in the doors and floor but would like a cheaper alternative.
#3
No distributor? No thanks
Thread Starter
iTrader: (6)
Join Date: Oct 2003
Location: Outskirts of Road Atlanta
Posts: 3,438
Likes: 0
Received 6 Likes
on
4 Posts
I've seen a lot of writeups on adhesive linings, like for AC ductwork, but nearly all the links from the forum are dead. Does anyone have a good adhesive line that they recommend?
#4
Nigga stole my bike!
Join Date: Oct 2002
Location: Des Allemands, Louisiana
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
#5
You have fighting spirit.
Join Date: Oct 2004
Location: NW
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking of going Cascade, but after a little research and a good comparison here and there i've decided to go with Second Skin. If anyone has had any first hand experience with the stuff please post your thoughts on it.
The way I figure on sound deadening/dampening, you're really only going to do it once so ya might as well do it right the first time with some decent quality stuff. However some is better than none if you were to look it that way as well.
http://www.secondskinaudio.com/cgi-bin/index.cgi?p=ps
The way I figure on sound deadening/dampening, you're really only going to do it once so ya might as well do it right the first time with some decent quality stuff. However some is better than none if you were to look it that way as well.
http://www.secondskinaudio.com/cgi-bin/index.cgi?p=ps
#6
Nigga stole my bike!
Join Date: Oct 2002
Location: Des Allemands, Louisiana
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Red Suns
I was thinking of going Cascade, but after a little research and a good comparison here and there i've decided to go with Second Skin. If anyone has had any first hand experience with the stuff please post your thoughts on it.
The way I figure on sound deadening/dampening, you're really only going to do it once so ya might as well do it right the first time with some decent quality stuff. However some is better than none if you were to look it that way as well.
http://www.secondskinaudio.com/cgi-bin/index.cgi?p=ps
The way I figure on sound deadening/dampening, you're really only going to do it once so ya might as well do it right the first time with some decent quality stuff. However some is better than none if you were to look it that way as well.
http://www.secondskinaudio.com/cgi-bin/index.cgi?p=ps
BTW, http://www.sounddeadenershowdown.com/
Trending Topics
#8
Nigga stole my bike!
Join Date: Oct 2002
Location: Des Allemands, Louisiana
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
I wish I would have realized it earlier. I didn't mean to say that eDead was good. It is decent, but I had gotten it mixed up with Damplifier. Their websites look similar. Haha.
Thread
Thread Starter
Forum
Replies
Last Post