SILVERfusion Silver Indicator Bulbs - DISCOUNT
Thread Starter
Newbie
Joined: Jan 2003
Posts: 2
Likes: 0
From: UK
SILVERfusion Silver Indicator Bulbs - DISCOUNT
We are please to offer all RX7 Owners the opportunity to purchase our SILVERfusion range of front/rear and side indicator bulbs at an extra 10% discount. To take advantage of this offer please visit the following link:
Select RX7 Owners from the pull down menu and insert the password: nfo223fn
[
Kind regards
SILVERfusion
Select RX7 Owners from the pull down menu and insert the password: nfo223fn
[
Kind regards
SILVERfusion
Senior Member
Joined: Feb 2001
Posts: 530
Likes: 0
From: PA
Not trying to stop you from doing business, but I would just like to inform others on this forum in case they are unaware...
But buying these bulbs will not take the orange look from the front blinkers. To do this, all you have to do is take the blinker off, take the housing apart (a heat gun works, if I remember right), and remove the orange reflector inside. Regardless of what bulbs you put inside, you will not remove the orange look until you take out this reflector. I have done this to my black car, and believe it adds a much cleaner look to the front of the car.
Just my 2 cents
But buying these bulbs will not take the orange look from the front blinkers. To do this, all you have to do is take the blinker off, take the housing apart (a heat gun works, if I remember right), and remove the orange reflector inside. Regardless of what bulbs you put inside, you will not remove the orange look until you take out this reflector. I have done this to my black car, and believe it adds a much cleaner look to the front of the car.
Just my 2 cents
Thread Starter
Newbie
Joined: Jan 2003
Posts: 2
Likes: 0
From: UK
Thanks Touring FD3S, that is a very good point. We fitted a pari fo these bulbs to a friend RX7 at the weekend (the one picture above and in the movie) and it was a bit of a pain to get the orange reflector out.. but the results were well worth it!
We did it the oven way, putting the entire lens into a low oven for about 5-7 minutes and the front came off nice and easy, then it's simply 2 screws and the reflector comes right out
We did it the oven way, putting the entire lens into a low oven for about 5-7 minutes and the front came off nice and easy, then it's simply 2 screws and the reflector comes right out
It's never fast enough...
Joined: Feb 2001
Posts: 3,760
Likes: 3
From: Miami - Given 1st place as the POOREST city in the US as per the federal government
SILVERfusion, please read our forum rules regarding vendor sales:
Vendor conduct:
No free advertising will be allowed! If you're a vendor, and you have a product you wish to promote to the RX-7 community, then purchase advertising on this site. We have MANY ways to allow you to promote your product, contact Jason Baughman at jbaughman@columbus.rr.com or Ryan Scott at advertising@rx7club.com for more information.
This includes starting Group Buys for products without getting prior consent from a Forum Admin. If you wish to organize a Group Buy, again contact Jason Baughman at jbaughman@columbus.rr.com or Ryan Scott at advertising@rx7club.com for more information.
These rules were put in place to preserve the financial status of this board. Hosting costs are VERY expensive. In order for us to continue providing it as a free service to users all over the world, we must generate some revenue. It's only fair that you, as a vendor, pay for promotion of your product.
Vendor conduct:
No free advertising will be allowed! If you're a vendor, and you have a product you wish to promote to the RX-7 community, then purchase advertising on this site. We have MANY ways to allow you to promote your product, contact Jason Baughman at jbaughman@columbus.rr.com or Ryan Scott at advertising@rx7club.com for more information.
This includes starting Group Buys for products without getting prior consent from a Forum Admin. If you wish to organize a Group Buy, again contact Jason Baughman at jbaughman@columbus.rr.com or Ryan Scott at advertising@rx7club.com for more information.
These rules were put in place to preserve the financial status of this board. Hosting costs are VERY expensive. In order for us to continue providing it as a free service to users all over the world, we must generate some revenue. It's only fair that you, as a vendor, pay for promotion of your product.
Thread
Thread Starter
Forum
Replies
Last Post