superdan50

iTrader: (3)

i like the lenses also, it seems to complete the headlight. without lenses it seems unfinished.

superdan50

iTrader: (3)

on the topic of lenses, does anyone have the cwest kit, and know since it bubbles out will it have enough clearance to fit the anubis lights?

superdan50

iTrader: (3)

i feel i have devised a way to make these lights. i am trying to decide if i want to try duplicate the scoot ones with minor changes. i am probably going to ad strobes (use at meets to draw attention). i will be using hid projector low beams and hella 90mm high beams (http://www.amazon.com/Hella-90mm-Hea...gy_auto_text_b). the strobes will be placed where what i believe to be the turn signals are on the scoot lights.

the only thing i cant decide is weather i want a mirror finish in the whole housing, body color, or some combination of both. any design ieafs lemme kno.

superdan50

iTrader: (3)

bump

superdan50

iTrader: (3)

if i were able to manufacture headlights would there be any interest. below is a rough idea of what they would look like form the front. i plan on using 90mm hellas for the high beam and a projector from another vehicle (not sure which yet) it will be like 2.5-3in lens. i also plan on r8 style leds on the base of the light. also i will probably offer halos at an additional charge. there will be optional strobes as well in the upper part, if strobes are not ordered they will be turn signals.

superdan50

iTrader: (3)

the lens will be similar to the RE sleek kit, and follow the original lines of the car. however they will not be glued down instead the will be bolted down in the same spot the headlight housing is. i will use sock bolt locations.

this is a labled example

superdan50

iTrader: (3)

the benefit of this is that a) there will be no glue border, b) and it will be more secure to the car, this means there is no risk of the lens coming off while at high speeds.

superdan50

iTrader: (3)

evening bump. is any one out there?

donjazz

iTrader: (1)

The idea and sketch seems on the money. If the finished products looks good and the price is reasonable I'm in.

superdan50

iTrader: (3)

any other feelings? and as far as price, it will be pretty close to the evo-r kit. and quality is a huge concern for me, i wont doop anybody b/c i have been before, and i was extremely pissed. i will offer a warranty of some kind, not sure what yet, basically i dont want ppl ******* something up and blaming me.

but it will some where between $600-$800, it depends on how much it cost me to make each set. it will come as i said before with several options (w/ or w/o halos) that will change the cost. shipping will be the cost to me of shipping, so no B.S. $150-$200 shipping charges.

superdan50

iTrader: (3)

the most important thing to me is decent lighting, none of those damn fog lamps.

KaiFD3S

iTrader: (37)

You should make a prototype first then show lots of detailed pics, if it comes out similar to the drawing you will draw a lot of interest...

superdan50

iTrader: (3)

thats what i planed on doing. im gunna sculpt it first then ill set the sculpture in my headlight void to demonstrate what it will look like. it will be a little rough, but i will obviously clean it up for the actual prototype.

i merely wanted to know if this was a design i should sculpt or if i should come up with something else. thus far it seems that i will go ahead with this design.

superdan50

iTrader: (3)

ill get some pics of an earlier very rough sculpture, my current design is kinda based off of my first the first sculpture, which is pretty much a rip off (im not gunna tiptoe around the fact) of the scoot ones. but as i looked more and more, i realized it wasnt quite there for me. so i revised it to somthing i felt i would like every time i saw them. i hope thats everyone else feels.

superdan50

iTrader: (3)

rather than post useless pics just check out the scoot headlights at the beginning of the thread. they look the same, just rougher, lol.

Montego

iTrader: (1)

too many lights in a headlight pod can look odd





just be careful as the anubis lights spark a similarity to:



A long time ago a member made that destinction and it stuck in my head. lol

superdan50

iTrader: (3)

creepy, accurate, but creepy lol. i plan on using lights smaller than those to avoid the crowded look. also i will stagger the lights instead of stacking them. hope fully it looks cleaner.

Montego

iTrader: (1)

go for it man. I love checking out new designs

superdan50

iTrader: (3)

granted it looks good and is done well, do u think it will draw a lot of interest, or do you think everyone that would be interested have already purchased another sleek kit, and wouldnt buy it. or is there still enough people out there waiting for the "right one to come" along?

Montego

iTrader: (1)

well I already have a light kit. Which after a lot of re-engineering i'm happy with. But that's just me

But there are plenty of others that are waiting for the correct kit, nevermind there are many who are dissatisfied with their current skits as well. IMO if you build a good looking quality product and price it accordingly people will come.

superdan50

iTrader: (3)

"if u build, it they will come" lol. that is what i wanted to hear. but i would rather get honest opinions more than anything, i guess it worked out for me that you think it will do well.

superdan50

iTrader: (3)

thanks for the input. i started a thread specifically for this topic, instead of working off an old thread. if you want you can post there. New Sleek Kit

superdan50

iTrader: (3)

6:23 pm bump

superdan50

iTrader: (3)

good afternoon bump

superdan50

iTrader: (3)

good evening bump