Removing RPM and Speedo Needles
#1
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Okotoks, AB, Canada
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Removing RPM and Speedo Needles
Okay, I need to remove the needles from the tach and the speedo on my 84 RX-7 and I'm having some difficulty, do the needles "pop" off or is there something that i need to un-screw behind (this is after the two assemblies have been removed from the actual cpanel (the circuit board.)
If you need pics, just ask.
cheers'
If you need pics, just ask.
cheers'
#2
Admitted Sevenaholic
Join Date: Feb 2001
Location: Ashland, OH
Posts: 1,910
Likes: 0
Received 0 Likes
on
0 Posts
I used 2 small bladed flat screw drivers, and gently twisted them to pry up on both sides at the same time evenly.
its just pops strait off, just go slow and gentle, the tach, you can actualy pull the shaft out.
its just pops strait off, just go slow and gentle, the tach, you can actualy pull the shaft out.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM