Interior / Exterior / Audio Talk about interior and exterior mods including audio.

radio wiring

Thread Tools
 
Search this Thread
 
Old May 17, 2002 | 02:07 AM
  #1  
lowrider65's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 107
Likes: 0
From: ohio
radio wiring

i put a radio in my 86 rx7 and it wont keep memory the end of the wires were cut off and i found the power wire and the switch power but there is one thats is white with some stripes on it that i didnt hook up do you guys know what might be the problem?
Reply
Old May 17, 2002 | 10:01 AM
  #2  
sunshine's Avatar
Rotary Freak
Tenured Member 20 Years
iTrader: (3)
 
Joined: Feb 2002
Posts: 1,697
Likes: 0
From: MN
which wires are cut? The stereo's harness or the cars harness?

There should be two power wires coming from the car, one is batt the other is fuse (only works when car is on). Find the two wires from the stereo harness that are also power and fuse (usually they are red and yellow, and are a little thicker than ther rest) Then just try different combos and one will work.
Reply
Old May 17, 2002 | 11:36 AM
  #3  
lowrider65's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 107
Likes: 0
From: ohio
yeah i got the radio to switch on and off with the key but it just wont keep memory and the car plugs are cut
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 02:23 AM.