Interior / Exterior / Audio Talk about interior and exterior mods including audio.

putting in a system need help

Old Feb 12, 2004 | 07:22 PM
  #1  
rx78788's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 369
Likes: 0
From: walla walla washington
putting in a system need help

I'm just wondering when i buy a head unit or the reciever. i know that i can not just plug in the stock wire is the unit. do the head units(that say sony) come with a harness for that unit, and then you have to wire the factory wire to it or do you have to buy a harness for the unit. i'm just so comfused someone help me

here is the head unit that i want what will i have to buy to install it
http://www.sounddomain.com/sku/PIODEH1600

if you look at the bottom it say that it comes with a free connection kit. is this what you need to install it in to my factory wireing harness?
thanks for your help
Reply
Old Feb 12, 2004 | 08:58 PM
  #2  
JKM's Avatar
JKM
Tenured Member 15 Years
 
Joined: Oct 2003
Posts: 1,341
Likes: 6
From: Burlington, NC
Well according to the site, it should come with everything you will need to install it, including harnesses and adapters. Lemme search through the site to make SURE that they actually have it ofr a second gen RX-7 .
Reply
Old Feb 12, 2004 | 09:05 PM
  #3  
JKM's Avatar
JKM
Tenured Member 15 Years
 
Joined: Oct 2003
Posts: 1,341
Likes: 6
From: Burlington, NC
Okay, i checked and they do have both the wiring harness and the installation kit you need, so putting it in will be a breeze. One thing though, if you still have the factory power antenna, you will need a relay to get the antenna to work, or you can make one yourself. You can pick up a relay at www.crutchfield.com or do a search and you can find out how to make it.

Personally, I just have a non-powered window, didn't feel like messing with it.
Reply
Old Feb 14, 2004 | 03:01 PM
  #4  
souroull's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 40
Likes: 0
From: Tucson AZ
ok maybe i'm a newb to rx7's but i've been into car stereo for several years now..
now.. what i'd do is:

get that receiver off ebay for $80 +shipping (brand new, 2004 model)

http://cgi.ebay.com/ws/eBayISAPI.dll...category=39762

get a wiring harness off www.crutchfield.com for $12

http://www.crutchfield.com/S-FFnzGsc...&avf=Y&search=

the thing with the power antenna.. you just have to find the remote wire that comes from the antenna and hook it up to the remote wire of the receiver (blue for pioneer). Its not already hooked up from the wiring harness because its the same remote that goes to amplifiers. It will prob be the one that goes nowhere.

I hope that helps

Last edited by souroull; Feb 14, 2004 at 03:05 PM.
Reply
Old Feb 14, 2004 | 04:38 PM
  #5  
cprx7's Avatar
aka Underdog
Tenured Member 15 Years
 
Joined: May 2003
Posts: 346
Likes: 0
From: Hoboken, New Jersey
Like JKM said though... I believe you will need the relay connection. If you have the stock power antenna
Reply
Old Feb 15, 2004 | 12:05 PM
  #6  
JKM's Avatar
JKM
Tenured Member 15 Years
 
Joined: Oct 2003
Posts: 1,341
Likes: 6
From: Burlington, NC
Yeah, if you just hook up the blue wire, what will happen is when you turn the stereo off the antenna will rise, when you turn it off it will go down. For some reason we have the ONE car in the universe that has the on/off signal reversed.

Since my antenna mast was broken anwyay, my car is sporting a great new $7 Autozone antenna
Reply
Old Feb 15, 2004 | 09:00 PM
  #7  
ckyguy's Avatar
ex-rx owner
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 151
Likes: 0
From: mad-city WI
if you don't want to buy a wiring harness to adapt that deck to your stock harness(es), just go to installdr.com they have diagrams for you to hardwire your deck to your car.
Reply
Old Feb 15, 2004 | 09:07 PM
  #8  
teamafx's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (4)
 
Joined: Dec 2003
Posts: 2,534
Likes: 0
From: pembroke, massachusetts
Never hardwire a car when you can get the harness. Much simpler, easy to do, and allows to put the stock radio back in if u sell it. I hate hardwiring a radio, its a waste.
Reply
Old Feb 15, 2004 | 11:40 PM
  #9  
souroull's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 40
Likes: 0
From: Tucson AZ
JKM... my appologies i didnt know that
you need the relay too then heh
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
Feb 26, 2019 02:04 AM
travenport
1st Generation Specific (1979-1985)
10
Aug 29, 2015 11:15 AM
86glxNA
New Member RX-7 Technical
7
Aug 22, 2015 08:54 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:48 AM.