Interior / Exterior / Audio Talk about interior and exterior mods including audio.

Post your custom LCD setup

Old Jun 29, 2007 | 12:21 AM
  #1  
RISEN's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2007
Posts: 677
Likes: 0
From: Northern Virginia
Post your custom LCD setup

I am about to put in a LCD touch screen monitor/PC/GPS receiver into my car and would like to see different setups (How they are mounted behind the dash)
Reply
Old Jun 30, 2007 | 07:57 PM
  #2  
RISEN's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2007
Posts: 677
Likes: 0
From: Northern Virginia
Anyone ever heard of Eonon?

http://www.eonon.com/

I just bought a Eonon touch screen 7 inch LCD for $76, mini ITX PC for $75 (6 inches X 6 Inches X 2 inches), and a $50 GPS Receiver . Now all I gotta do is wait for them to arrive and hook them up to make sure everything works before I fabricate the DIN.
Reply
Old Jul 1, 2007 | 02:52 AM
  #3  
RX72NR's Avatar
paying to play
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jun 2006
Posts: 1,021
Likes: 2
From: Renton,WA.
Eclipse AVN-5435, I made the trim ring out of aluminum and had to make a custom mounting bracket.
Attached Thumbnails Post your custom LCD setup-rx7dash1.jpg   Post your custom LCD setup-rx7radio2.jpg   Post your custom LCD setup-rx7knobcf.jpg   Post your custom LCD setup-rx7wheel2.jpg   Post your custom LCD setup-rx7radio1.jpg  

Reply
Old Jul 1, 2007 | 08:53 AM
  #4  
purerx7's Avatar
Registered User
iTrader: (61)
 
Joined: Apr 2004
Posts: 7,334
Likes: 8
From: Los Angeles, CA
old setup with the d-310, the double din w200 is going in soon
Reply
Old Jul 1, 2007 | 09:47 AM
  #5  
RISEN's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2007
Posts: 677
Likes: 0
From: Northern Virginia
Originally Posted by RX72NR
Eclipse AVN-5435, I made the trim ring out of aluminum and had to make a custom mounting bracket.
That looks nice! How did you go about cutting the trim ring? Do you have any close up view of the trim ring where you cut it?
Reply
Old Jul 1, 2007 | 02:58 PM
  #6  
RX72NR's Avatar
paying to play
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jun 2006
Posts: 1,021
Likes: 2
From: Renton,WA.
I used 1/4" thick stock and cut it out on a milling machine. Remove the center first then trim the edges. I also polished it to match the chrome guage rings on the dash.
Reply
Old Jul 2, 2007 | 07:28 PM
  #7  
RISEN's Avatar
Thread Starter
Senior Member
 
Joined: Apr 2007
Posts: 677
Likes: 0
From: Northern Virginia
Ah, a milling machine. No wonder it looks nice. How did you get the corners to be rounded like that?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:24 PM.